Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS952091
This part works with the following brands: GE, Hotpoint & Kenmore.
Removed three screws from the top, slide top cover to left and installed, replaced top cover and screws.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Took 3 screws from the top of the vent; inserted the charcoal filter and replaced the screws.
I never even knew I needed the charcoal filter for my old microwave, but it was a simple install, just three screws.The reason I am replying to this is to let people know about the microwave installation itself.I previously had a hotpoint, 6 years old that I ruined trying to replace a lightbulb, long story for another time. I wanted to be able to turn off the turntable, so I upgraded to a GE spacesaver. It took a entire weekend to install the hotpoint, if you count the time for arguments and head scratching before drilling into my brand new natural cherry cabinets.We chose to go with GE as it was the same manufacturer.WE USED THE SAME WALL MOUNT AND SCREW HOLES!!!! JUST TOOK 15 MINUTES. TOOK LONGER TO GET THE MICROWAVE OUT OF THE BOX!
actually wasn't a repair installed new microwave over the stove it did not come with charcoal filters for inside venting, went on line found your prices to be the best for this set up so I ordered two, easy job remove 3 screws and remove front cover insert filters and then replacefront cover and screws! done deal!Thanks for the great pricesLarry
remove 3 screws on top of microwave remove front place filter and reinstall front with 3 screws.
Install your item works well. Will use you for other items,
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.