9495545-1-S-Frigidaire-809006501-Bottom Door Gasket
9495545-1-S-Frigidaire-809006501-Bottom Door Gasket 9495545-2-S-Frigidaire-809006501-Bottom Door Gasket http://www.partselect.com/Schematics/Frigidaire/QYY7PNHU.gif

Bottom Door Gasket

PartSelect Number PS9495545

This gasket goes on the bottom of the dishwasher door.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Leaking.
  • Compare At

    $9.28
  • You Save

    $1.55
  • Your Price

    $7.73
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 20 reviews What's this?
1-5 of 20
 

57 of 71 people found this instruction helpful

Parts Used:
  • Bottom Door Gasket
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ronald from Berwick, PA

Leaking under door

Received the part 3 working days after order. Part was exactly like the original.
Removed the door. Slipped off old gasket and replaced with new gasket. Replaced door and tried rinse cycle. Worked perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

23 of 29 people found this instruction helpful

Parts Used:
  • Bottom Door Gasket
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: David from Saint Michael, MN

Dishwasher door was leaking water at the bottom corners.

It took less than a minute to remove the old bottom door gasket - it pulls right out. You wouldn't think the part looks the way it does (a 1.5 inch wide plastic strip that runs the length of the door with rubber gaskets on both ends) but have faith. Trust the diagram/picture - it is the correct part and will fix the leak. The new gasket arrived within a couple days of ordering and was simple to install - no tools. It slides into place in less than a minute and is held in by friction. Problem solved and no more leaks. For under $12 (parts and shipping) I had my dishwasher fixed. A service call by itself would have run $75 - just for someone to show up at the house, and then probably another $50 for parts and labor to install. My wife made the comment "Even I could have fixed that". A very simple and easy repair - you can do it!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 12 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Ron from Montclair, NJ

One of the springs was broken, the door would not open or close properly. There was also a leak coming from the front of the dishwasher.

I removed the dishwasher from the cabinet space (two screws) and manually replaced both springs. I replaced one spring first to see if there would be an improvement when the second new spring was installed. There was much better tension once the second new spring was added.That is why changing both springs is recommended. This was very easy.
Changing the gasket was scary because I thought the the whole door would have to be taken apart. You know nothing ever goes back together the same. I feared that I would create an even bigger leak than what I had. Taken the door apart didnt work for me, so I just pulled the old gasket by hand and pressed in the new one. I made sure that it was seated correctly. Voila no leak.
The dishwasher is running as good as new.
I ordered these parts on Friday morning. They were on my door step Monday morning,
I highly recommend ordering from this site.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 12 people found this instruction helpful

Parts Used:
  • Bottom Door Gasket
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Kathleen from Hamilton, NJ

Leaking from the bottom of dishwasher

Removed screws and put new bottom gasket in old one just fell out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used:
  • Bottom Door Gasket
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Ronald from Billings, MT

Worn out seal

Used pliers to remove old seal. Keep seal in position, note the notch facing the hole. Align the new seal, press it in, the notch helps align. Mine slipped in easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 20