Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS9494490
This part is on the outer door of the dryer.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
I pried out the remaining pieces of the handle out of the door with a screwdriver. When the new part arrived, I snapped it into place and it was done. It fit perfectly.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I've always heard it was a simple job to replace the belt and that would solve the problem. I'd defer to others online when they suggest to replace the rear bearing - they are totally right about that suggestion. My bearing basically fell apart in my hands. Not sure if I needed a belt or not, but it's worth replacing while you are tearing the thing apart. It took way longer to tear apart than to put back together. The parts and prices from PartsSelect were perfect. The parts were received in 4 business days as they said and were perfect replacement parts.
Inserted handle into slots
Removed the broken handle from the dryer and popped on the new one.
I received the replacement part I ordered from PartSelect.com within 3 days of placing the order. I opened the plastic bag it came in. I snapped the part into the holes left vacant by aforementioned abscence of broken part.
Clips on the inside of the door handle had snapped off, 1 minute later it worked like new. NO TOOLS required! So happy my older appliances can have new life by the parts carried by PartSelect. Thanks!
My husband broke the door handle, but of course, i had to be the one to order the part & fix it. I ordered the part on the weekend and much to my suprise it was on my doorstep on Tuesday when I got home from work. Then I saw the part was shipped from nearby Louisville. I was overly happy with partselect!!!!! All I did was open the packaging and clip the dryer handle into the 4 holes. Easy as pie!!!!
door handle just snaps right in and the lintfilter is a no brainer. thank you very much partselect keep up the good work
I opened the box, removed the items from the plastic, checked the paperwork and the invoices and installed everything within 15 minutes!Thank you PartSelect! It was a pleasure doing business with you!Everything is working properly and looks great.
I removed several torx srews across the back control panel. Removed two philips screws under top of front dryer door. Pulled up on top surface of dryer case. Removed two more screws on backside of front door panel. Pulled front door panel forward and inserted drum slides into slots that they just popped into with a small button rod to keep them in place. The old drum slides were completely worn down or fell off. It runs like a new one again. It is over 10 years old. The new door handle just snapped into place.Original door handle had been broken off for several years.
All I neede to do was buy the new part and snap it into place on the door. The hardest part was making the door usable while waiting for a new handle. The solution was good old duct tape. I just taped the old broken handle in place until the new one showed up.
Old handle popped out by pulling back and out. Inserted new handle by pushing in and forward. Easy!
Opened up the package and took off existing door handle. The new one snapped right into place. This took all of 10 seconds!
I pulled the old handle off and pushed the new one on.No problem at all.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.