This part holds the water during the wash cycle and houses the spin basket.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Washer Outer Tub
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH45X20473 replaces these:
WH45X10024, WH45X10111
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.3
Filter By Rating:
5 Stars
1
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nathan A - September 25, 2020
Verified Purchase
Fixed the leak
First replaced the seal but that didn't fix the leak, the seat where the seal sits in was way too loose, should have known. New outer tub job was easier than it looks to replace.
4 Stars only because the part was dirty and was missing a final tooling step in manufacturing, one of the holes was not drilled in the bottom of it where the shield screw attaches to. But this is GE's fault and not PartSelect.
★★★★★
★★★★★
Bobby G - March 4, 2020
Verified Purchase
Tub exchange
I ordered and received the outter tub. It fit perfect. Had no problems at all with install. Shipping was a bit steep, but it is what it is. It was still cheaper with you'll than anywhere else. Thank u
★★★★★
★★★★★
Alisa I - May 3, 2019
Verified Purchase
Happy fixes
It is some overpriced but I was happy to have it!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
washer was leaking (noticed during spin cycle)
Took complete tub assembly out of washer and inspected it. Did not find an obvious cause of leak but all 8 screws on inner tub hub were loose. As both tub nut and split ring were corroded, replaced them and the outer tub seal. Did a lot of cleaning!! As I was putting the trans assy back on the outer tub, I noticed a crack around the d
... Read morerain spout. At 1st, it looked like it belonged there but a closer look proved it didn't. I ordered a new outer tub (which came in 2 days) and I put the whole thing back together. Reassembly was far easier than disassembly was and I learned a whole lot about washers. YouTube is a great source of information.
Read less
John from Shady Point, OK
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench set
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gwendolyn
December 9, 2019
My repairmen says I have a hole in the outer tub. How can a hole be made in the outer tub? They say this is not covered under warranty.
For model number MVWC465HW
Hello Gwendolyn, Thank you for the question. It would be hard to say how the tub made a hole sorry, it could have been a defect is the part or something that was put in during a wash. For warranty you would need to contact Maytag directly as we just sell parts. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tony
July 2, 2021
What is capacity of washer 4.3 or 4.5
For model number WPRE8150K2WT
Hello Tony, Thank you for contacting PartSelect.com. Very sorry but we do not have the size of the appliance, just parts lists and diagrams. For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the appliance directly. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
