9493077-1-S-GE-WE01X20580-HANDLE DOOR
9493077-1-S-GE-WE01X20580-HANDLE DOOR 9493077-2-S-GE-WE01X20580-HANDLE DOOR http://www.partselect.com/Schematics/GE/00109773i02.gif

HANDLE DOOR

PartSelect Number PS9493077

Almond in color.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $10.18
  • You Save

    $1.70
  • Your Price

    $8.48
In Stock
Order within the next 1 hr and 36 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 5 reviews What's this?
1-5 of 5
 

3 of 4 people found this instruction helpful

Parts Used:
  • HANDLE DOOR
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Geraldine from Tobyhanna, PA

Broken handle

With my hands, a 2 yr old could of done it. But I was amazed how quickly I received the part. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Wrench set
Customer: Peter from AMENIA, NY

The on/off switch stem broke off

That happened because the on/off selector nob broke, so I instructed my wife to use a small pair pliers to turn the stem as a work around until I could get to it (6 mos). It eventually broke off. I called a repair service that charges $90 to look at it, but cannot estimate the whole job. The dilemma is that the dryer is over five years old, so a repair costing more than a few hundred dollars is not as reasonable as buying a new dryer. What to do? I ordered the parts and diagrams on the internet. They arrived two days later. The dryer is jammed into a narrow space, so to see the two screws in the back, I needed a small mirror on telescoping wand. To get at the broken switch, I needed unscrew two "star" screws and remove the control panel facing. Not Phillips head, not a common slot head. This star screw is hard to find. I finally located it in the fastener section. I bought a bit that fit my stubby ratchet screw driver. I had to use the stubby screw driver because it was such a cramped space. I finally got at the switch, loosened one screw (hex head) and replaced the two wires on clips - no solder needed. Got a kiss and a squeeze from the missus and a load of clean clothes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Peter from Wallkill, NY

Intermittant no heat

Unplug appliance !!I remove the 2 screws holding the backsplash asm on. Tip backsplash forward. remove rear cover screws & cover. Remove timer 1 screw. remove knob, pulls off. transfer wires to new timer 1 @ a time , making sure to place wire in correct position, letters on old & new timer indicate location. Reinstall knob. Reinstall timer & backsplash cover & remount backsplash..Plug in dryer & Check operation

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used:
  • HANDLE DOOR
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: ROBERT from MONROE TOWNSHIP, NJ

Door handle broke to dr;yer

handle broke on sunday( not the best day to order things). ordered it from this site and had it by tuesday. great service and best price i found on the web. tks

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used:
  • HANDLE DOOR
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Christopher from Mount Laurel, NJ

Broken handle

Piece of cake. A 10 year old could have done it. Only regret was that I was never asked for a color. The dryer is Tan and the handle I received was White. Personally I don't really care

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 5