Part Location Diagram of W11607443 Whirlpool Lint Filter
See part 10 in the diagram
Replacing your Kenmore Dryer Lint Filter
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Lint Filter W11607443

 Fits your YNED5800TQ0!
★★★★★
★★★★★
22 Reviews

Rated by 26 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 43.06
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your YNED5800TQ0!
PartSelect Number PS16744854
Manufacturer Part Number W11607443
Manufactured by Whirlpool
Product Description

Lint Filter Specifications

This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. Check your user manual and model number to see if this is the right part for you. Make sure you empty the lint filter after every use of the dryer and check the filter slot for an excess buildup of lint, which can shorten the life of your filter and be a fire hazard. The screen is approximately 20 inches in length, not including the handle, and around 8.5 inches wide.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Kenmore Dryer Lint Filter

Replacing your Kenmore Dryer Lint Filter
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Kenmore, Whirlpool, Maytag, Amana.
Part# W11607443 replaces these:
2006, 2007, 26000348851, 348846, 348851, 689465, 8211, 8219, 8557857, 8557882, 8558463, 8559787, 8565972, 99989680, 99989681, W10641634, W11451394, W11522758, W11538107
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
22 Reviews
4.9
Filter By Rating:
  • 5 Stars
    20
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.8 / 5.0, 26 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Drum not turning; accompanied by loud "screeching" sound.
Followed instructional video provided for this type of repair after diagnosing problem via of 'troubleshooting' on PartsSelect site. Simple, safe, and relatively easy (minimal mechanical knowledge helpful).
Second time using PartSelect; washing machine repair ~ 6 mo. previous.
PartSelect was spot-on with that repair as well, saving hundreds of dollars.....my go-to site for appliance repairs and pats....make it yours as well and you will NOT be disappointed! Fast, prompt shipping.
Other Parts Used:
Lint Filter Motor Pulley - 60 Hz. Multi Rib Belt - 92-1/4"
  • holly from LONG BCH TWP, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint would no go throw
Received the new lint removal from the box and install it easily
  • Jean M from CHESAPEAKE, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint screen was broken - replaced it with a new one.
There were no repairs - I just ordered a lint screen because the screen on the last one pulled away from the frame and wasn't doing a good job of catching the lint. Took approximately 2 seconds to push the new one in the slot.

Fast efficient delivery from Parts Select.com.

No need to publish this I'm sure.
  • Maura from Burbank, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint collector was cracked and I was unable to insert easily.
Simply removed old dryer lint collector and installed the new one.
  • Marilyn from HORNICK, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed a new filter screen for Kenmore Dryer
Pulled out the very old worn out and damaged filter screen and replaced it with a new filter screen.
  • SYDNEY from BOSTON, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace lint filter on my 25 yr old me more dryer
Easily installed lint filter for my 25 yr old dryer Thanks
  • Roberta from VIRGINIA BCH, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not turn off when door was opened!
Your video of the door switch replacement makes this job easy! My recommendation watch the video and you will have the switch replaced in a short time! My dryer was older than the dryer in the video but the principal of repair is the same! My new switch replacement fixed my dryer so when the door is opened the dryer shuts off!
Other Parts Used:
Lint Filter Dryer Door Switch
  • Michael B. from ELKMONT, AL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat in dryer and lint filter torn
Dryer didn't heat. I got the heating element thru sears and when I ordered it I thought I should also order the thermostats but I didn't. Element arrived two days after ordered right on time. Slipped right in in a few minutes. Turned dryer on. No heat. Went back to drawing board. Watched videos on part select site and realized I needed thermostats. Ordered them and lint filter. Arrived right on schedule and also slipped in in no time flat. Turned dryer on and yes it heated perfectly. Wife was pretty impressed with new lint filter as other one was torn with jagged edges. MY SUGGESTION: if your dryer doesn't heat and you can't test each individual item thermostats and heating element order the three of them ( high limit and cycling thermostats and heating element) cause they'll probably will all go at the same time anyway. Then won't have to wait on the second shipment if things don't work with partial replacement. Parts select was great and videos are well understood and easy to follow. Would certainly use again.
Other Parts Used:
Lint Filter Dryer High Limit Thermostat Dryer Cycling Thermostat
  • Gerard from Huntington, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer wouldn't turn on
Used your web site to diagnose the problem. Ordered part. Part arrived the next day and within 30 minutes had the dryer up and running. Took back off of dryer, simply unscrewed the old thermal fuse and replaced it with the new one.
Other Parts Used:
Lint Filter Dryer Thermal Fuse
  • Diane from Westerlo, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace lint filter
with both hands
  • Ed from Greensboro, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cathy
February 29, 2024
How can I get a replacement handle for my lint filter part #689461
For model number 86878
PartSelect logo
Hello Cathy, thank you for your inquiry. The handle for the lint filter does not come separately. It comes along with the lint filter, part number PS11757278. If you need help placing an order for it, please feel free to give us a call!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16744854
Manufacturer Part Number: W11607443
Brand
Model Number
Description
Kenmore
11060522900
Dryer
Kenmore
11060602990
Dryer
Kenmore
11060612990
Dryer
Kenmore
11060622990
Dryer
Kenmore
11060702990
Dryer
Kenmore
11060712990
Dryer
Kenmore
11060722990
Dryer
Kenmore
11060724990
Dryer
Kenmore
11060727990
Dryer
Kenmore
11060802990
Dryer
Kenmore
11060812990
Dryer
Kenmore
11060814990
Dryer
Kenmore
11060817990
Dryer
Kenmore
11060832990
Dryer
Kenmore
11060842990
Dryer
Kenmore
11060852990
Dryer
Kenmore
11060854990
Dryer
Kenmore
11060857990
Dryer
Kenmore
11061202010
Dryer
Kenmore
11061202011
Dryer
Kenmore
11061262311
Dryer - ELECTRIC DRYER
Kenmore
11061802000
Dryer
Kenmore
11061804000
Dryer
Kenmore
11061812000
Dryer
Kenmore
11061814000
Dryer
Kenmore
1106192310
Dryer - ELECTRIC DRYER
Kenmore
1106192311
Dryer - ELECTRIC DRYER
Kenmore
11062102310
Dryer - 29" ELECTRIC DRYER
Kenmore
11062102311
Dryer - ELECTRIC DRYER
Kenmore
11062602100
Dryer
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service