http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/6ZPRDMKD.gif
See part 10 in the diagram

SCREEN

PartSelect Number PS9492076

Manufacturer Part Number W10641634
Manufactured by Whirlpool

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Takes too long to dry.
  • Compare At

    $32.05
  • You Save

    $5.34
  • Your Price

    $26.71
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 18 reviews What's this?
1-15 of 18
 

368 of 369 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerDaniel from Wichita KS

Door catch broken; lint filter handle had come off

Removed some screws and partially dismantled the door so I could get the old catch out. Inserted the new catch, and put the screws back in. Saved me an $80+ service call.
On the filter, I had to use pliers to remove the old one because the handle had broken off. Did that, and inserted the new one. Done. Sears had been unable to supply me with a new filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

25 of 26 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver

CustomerKent from Sebastopol CA

No heat - everything else was functional

After 30 miutes of research on this website I felt confident to investigate the problem. Removal of the back cover is straightforward. Initially I did not appreciate and obstruction of the ductwork exitting the dryer. I bypassed the thermal fuse by removing the wires and temporarily taping them together and heat was restored. Knowing flow was OK exitting the dryer I investigated flow from the lint trap to the blower motor which is where the problem was located. In our case the lint filter was torn allowing many small objects and lint to near completely clog the pathway between the lint trap and the blower motor. It was difficult to appreaciate how obstructed that pathway was without removing the entire channel from the machine which was simple and required removing two screws at the lint trap opening followed by 3-4 screws on the back of the channel. Once removed, it was easy to appreaciate the debris clogging the channel and was easy to clean with a hose and running water. Replacement was a snap. The parts were oredered and sent in a day. I prophylactically replaced thermastats based upon a recommendation from another website. Replacing previous parts with new parts was a snap. Out the door we were up and running for around $100 (including new thermostats). The dryer repair man may go the way of the dinosaur.

Help other customers find the most helpful instructions.

Were these instructions helpful?

17 of 18 people found this instruction helpful

Parts Used

  • SCREEN

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRichard from Fairfax VA

Needed lint filter for my old kenmore dryer that was no longer manufactured by sears.

Lint filter supplied by Parts Select was an exact replacement by an aftermarket manufacturer. I put the old one and the new one side by side and they were identical (of course, the handle wasn't broken off on the new one!). I coulnd't be happier. It arrived at my house 2 days after I ordered it. I highly recommend Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?

12 of 15 people found this instruction helpful

Parts Used

  • SCREEN

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBill from Farmington Hills MI

The old lint screen on the dryer was broken

I analyzed the situation to see how to remove the old lint screen. I carefully pulled out the old lint screen. I was careful not to drop it. With caution, I placed the old lint screen in the trash receptacle that was nearby. Next, I opened the box that the new lint screen came in with a sharp knife. I removed the new lint screen from the box, took off the plastic wrap and inserted the lint screen in the same slot that the old one used to be in. I tested that it was seated correctly by pulling it out and reseating it in the slot. The true test came when I ran my first load of laundry through the dryer. The total repair time for this fix was 14.92 seconds.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 9 people found this instruction helpful

Parts Used

  • SCREEN

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerChris from Morgan City LA

Old lint screen -torn at wire mesh

Local stores did not have any in supply. Went to Partselect and located lint screen, ordered, received in 3 days. replaced screen, Wife now happy again...

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • SCREEN

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerEd from Greensboro NC

Replace lint filter

with both hands

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • SCREEN

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMichael from Kingman AZ

Old screen failed ripped needed replaced.

After researching and finding correct replacement unit placed order and waited to receive. Screen is located top of dryer so replacement simple and fit was perfect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • SCREEN

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerConnie from Gaithersburg MD

Handle broke on filter

just slide the new filter in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • SCREEN

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDon from Dayton TX

Lint filter wore out had to be replace

Changed out the lint filter

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • SCREEN

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRonald from Anaheim CA

Broken handle on lint filter

received part 4 days after order. very pleased about that! Local Sears Service center was out of stock.

carefully removed old "handleless" lint filter.
inserted new lint filter and Voila! success.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • SCREEN

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerClaude from Austin TX

Lint filter wore out.

It required no tools, just take out the old torn filter and slip in the new one. I should have ordered it a year ago, with the ease of the website and the delivery via Fed Ex. super easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerGerard from Huntington WV

No heat in dryer and lint filter torn

Dryer didn't heat. I got the heating element thru sears and when I ordered it I thought I should also order the thermostats but I didn't. Element arrived two days after ordered right on time. Slipped right in in a few minutes. Turned dryer on. No heat. Went back to drawing board. Watched videos on part select site and realized I needed thermostats. Ordered them and lint filter. Arrived right on schedule and also slipped in in no time flat. Turned dryer on and yes it heated perfectly. Wife was pretty impressed with new lint filter as other one was torn with jagged edges. MY SUGGESTION: if your dryer doesn't heat and you can't test each individual item thermostats and heating element order the three of them ( high limit and cycling thermostats and heating element) cause they'll probably will all go at the same time anyway. Then won't have to wait on the second shipment if things don't work with partial replacement. Parts select was great and videos are well understood and easy to follow. Would certainly use again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • SCREEN

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerStacey from Corinth TX

The handle had broken on the lint filter so I had fashioned paper clips into the holes to get the filter out

after i got the replacement filter, it fit perfectly. the filter is white & my dryer is beige but i don't care...i'm just happy i have a good lint filter again, for my at least 30 year old dryer....thanks part select!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • SCREEN

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRichard from Monroe NY

Lint filter handle broke off

the replacement part fit perfectly, as I thought it would given another repair story. The repair took less than a minute to take the old one out and put the new one in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • SCREEN

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn from New Bedford MA

Broken handle

1) removed the old broken filter
2) deposited it in nearby wastebasket (with lint attached)
3) used scissors (see above) to remove plastic cover from new lint filter
4) inserted new lint filter
5) marveled at my handiwork!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 18