Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS9491819
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
First, I cut the power to the stove to be sure no electrical current could be conducted. Next, I removed the two screws that hold the heating element to the back of the stove. Then, I removed the oven racks and slowly slid the heating element out until I could see the wires that attached to it. Because the element has the female end of the wire, I pulled the male ends out of both the left and right side of the element.. This releases the old element and I discarded it. Next, I took the new element, slide the male ends into the new female ends that protruded from both the right and left side of the element. I crimped these slightly with my pliers to make sure that they would stay secure when I pushed the element into place. With the new element securely attached, I slowly slid the element into place, this forces the exposed wires to be retracted out of sight and in the insulated part of the oven. I then took the two screws that I had to removed in the beginning, and used them to fasten this new heating element to the back of the oven. Finally, I turned the power back on and the element worked fine.
Help other customers find the most helpful instructions.
Were these instructions helpful?
This is fantastic. We've had this Jenn-Air range for some time now, but we only used the two-burner module on one side and the indoor grill on the other. Less than a week before Thanksgiving we decided that the extra two burners would be very useful, so I set out to search the internet for a good deal and the possibility of getting it before needed. Then I found your website and within minutes theunit was on the way and, at the most reasonalable price available. I recieved the unit he next day. All I had to do was plug in the module and it was done. Thanks for making life easy
I just popped out the old cartridges, and popped in the new ones. It looks like a new cook top. Thanks so much..I'm thrilled..
I unplugged the old unit and plugged in the new unit. Done in less than 1 minute. It took more time to open the shipping box.
I placed my order online and received the replacement parts the very next day - thank you so much!!The hardest part of this repair job was removing it from the boxes! Pulling out the old cartridge and inserting the new was as easy as could be!
This was an extremely simple repair. No screws, no nothing. If you can plug in a lamp, you can swap out this part just as easily.
1. Lifted out the old burner cartridges2. Opened the box from PartSelect3. Inserted the new burner cartridgesIt's plug and play. No tools required !
1-Unplugged the old 2 burner element.2-Plugged in the new element.3-Elapsed time approx. 10 seconds.4-It took longer to remove the new element from it's shipping carton than it took to remove the old & install the new.
I simply removed the old cartridge by lifting it up and pulling the plug end out. I slid the new coil cartridge with the plug end in its place. The grill replacement was similar. Remove the grll grates, pull out the burner element from its plug position, remove the grill rocks and insert the new coil cartridge in its place. No tools or special skills required. It's like I now have a new cook top.
When burner insert arrived just plugged in. Piece of cake !
slipped the old modules out and installed the new modules by slipping them into the cavity and into the electrical connection.
Took out of box and plugged into slot.....even I was capable of doing this....easy
I think Part Select is great, but my story? I just plugged in a module.It was so easy...well...a technical writer--one of those people who writes operation manuals--could have done it. But afterward, they wouldn't have been able to explain to anyone other than another tech writer how it was done.
Lifted the grill out and slid the new burner unit in place. This was very easy; no problem at all.
I received it before Thanksgiving and for the first time I had alot of burners to use for the holidays. It was great.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.