http://www.partselect.com/Schematics/GE/GE_Thumb/00123854i01.gif
See part 100 in the diagram

TIMER

PartSelect Number PS9491768

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will not start.
  • Compare At

    $54.60
  • You Save

    $9.10
  • Your Price

    $45.50
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 6 reviews What's this?
1-6 of 6
 

36 of 45 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerGary from Brooklyn WI

Dryer timer operation was restricted causing multiple broken (plastic) knobs.

Turned off the electrical breaker to the dryer.
Removed the three screws holding the control panel. Removed the old knob. Tilted the control panel forward to expose the wiring and controls. Removed the screw holding the old timer and loosened the timer - leaving the wires hooked up. Then I removed one wire at a time and reconnected to the corresponding terminal on the new timer until all of the wires were connected to the new timer. Replaced the timer and re-assembled the control panel on the dryer - turned the electric breaker back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

12 of 15 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerRichard from Palmetto Bay FL

Timer would not turn - broke knobs

The hardest part of this repair was determining which parts to buy. The PartSelect website did not list this particular model dryer. But the GE site did. I confirmed that the G2WW and the G3WW models used the same parts on the GE site and then purchased them at the PartSelect site. I saved almost 20% and the parts arrived the next day. The actual repair job was easier than I thought. Replace wire for wire, take the old timer off and snap the new one in place. Works perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 12 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerThomas from Webster NY

Timer bound up, causing the knob to break.

Disassembled back splash to inspect timer. Ordered parts (at a 50% discount from brick and mortar stores). Parts delivered in two days. Installed new timer and had everything back together in 10 minutes. No-brainer!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

  • TIMER

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerAndre from St. Paul Park MN

Dryer timer did not select proper time setting

Pulled Timer knob off. Realized at that time it was just the knob slipping on the shaft of the dryer timer. Removed six screws on back panel of control knobs. Removed and replaced one wire at a time from old to new dryer timer. Put new dryer time in place and reinstalled back panel. I replaced knob with one of the four that I never use. I replaced timer just because I had it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 8 people found this instruction helpful

Parts Used

  • TIMER

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerPete from Downey CA

Broken dryer timer

I called a repair guy from a well thought of city appliance store. Guy gives me a price of $250 to repair. I let him know I only paid about $350 for the dryer. Guy tells me he can sell me a new dryer. Did my search and found the part with Part Select for around $50. Delivery was quick and installation easy. At around $200 for a 10 min installation, I may start my own service company.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 29 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerJerald from San Antonio TX

Dryer cycle switch broke/washer pressure switch

took screws out of panel back and replaced items one wire at a time. real simple to do

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-6 of 6