This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint.
Part# WE04X20415 replaces these:
AP5805477, WE4M355, WE4M357
Customer Reviews
Average Rating:
★★★★★
★★★★★
30 Reviews
4.6
Filter By Rating:
5 Stars
26
4 Stars
1
3 Stars
1
2 Stars
0
1 Star
2
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joshua C - December 9, 2022
Verified Purchase
??
??
★★★★★
★★★★★
Dimitri W - December 7, 2022
Verified Purchase
Timer
The part arrived on time and worked out well
★★★★★
★★★★★
Edward M - May 4, 2022
Verified Purchase
Part fit perfectly,works great
Great product and very fast shipping thanks. Would buy again
★★★★★
★★★★★
Molly G - August 3, 2021
Verified Purchase
Easy repair , works great!
The part we received was just what we needed to get our dryer up and running. Now there is no need to buy a new one because the parts and repair made it work perfectly!
★★★★★
★★★★★
Mary M - June 1, 2021
Verified Purchase
easy repair
timer was easily replaced and works as it should. fast delivery too!
★★★★★
★★★★★
Grace A - May 18, 2021
Verified Purchase
The part Works as intended
Great customer service. Highly recommend part select
★★★★★
★★★★★
Michael B - September 14, 2020
Verified Purchase
Installing the part was so easy took longer to take the dryer apart
Had the part within 2 days
Installing the part was easy
Done within 10 minutes
★★★★★
★★★★★
Joy L - August 8, 2020
Verified Purchase
Easy to fix
It was so easy to put on and I’m not talented in that department. Just wish the plastic piece on timer was metal
★★★★★
★★★★★
Susan G - November 27, 2019
Verified Purchase
Perfect
Easy repair, good company
★★★★★
★★★★★
Janice H - November 13, 2019
Verified Purchase
Worked as expected
Good to go. Everything went easy and simple. Thank you
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 15 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer start switch would only work if something rested against it and then dryer stopped in the middle of cycle.
I watched how to do the repair on YouTube prior to ordering the parts. The video seemed simple enough so I ordered the parts and followed along with the YouTube video. My new push to start switch did not work properly, still had to rest a heavy object against it to get the dryer going and my timer knob worked for a full cycle and a half
... Read more before it stopped working. It became loose and will not set on any specific time setting. Perhaps I diagnosed my problem incorrectly, not sure just know I am out of $96.06 and am grateful that I have a clothes line strung up outside to dry my clothes for now!
part took 10 days to come not part select fault took 3 days from st paul to new jersey went to woodbridge nj 2days to keasby nj another 2 days to edsion nj 2 days to staten island1 day took about 15 min to install dryer works fine now thanks part select
willie from STATEN ISLAND, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken timer
Remove screws from back top section, twist out old timer and twist new one in place. Replace cords one at a time so you get correct position. Replace backplate and push knob onto new timer shaft . Congrats your done and saved about 200 bucks !
William from BLOOMINGTON, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer would not shut off
On my 80th Birthday my son and I replaced the timer. We removed the screws from the back panel. Disconnected the dryer from the electrical outlet. Removed the knob from the front panel. Pulled out the timer and took a picture of the wires connected to the timer. Then we transferred each wire one at a time from the old timer to the new t
... Read moreimer. Then we replaced the timer and reconnected the knob on the front. Closed the front panel. Replaced the back. Then for the moment of truth: we set the timer for a few minutes and pushed start. A few minutes later the buzzer went off and the dryer stopped. And we both screamed and praised the Lord. We had never done anything like this before
Read less
LUCILLE from MILLVALE, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer timer wasn’t working with auto dry or time dry
When I ordered it in the email receipt were directions- just click installation instructions- I also looked at u tube video by just typing in GE Dryer timer repair. It took longer to clean the floor where the dryer sat for years since we never move it. Cleaning time is included in the 15 minutes— You will feel great since just saved a to
... Read moren of money. So glad I found you for future issues with appliance repair. There are U Tube videos to fix everything. Robert Maheu Huntington Beach
Read less
Robert from HUNTINGTN BCH, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dial on the timer would no longer engage (knob would just spin)
I followed the Youtube video created by PartSelect and it was SUPER easy. Removed dial from front panel I unscrewed the back panel, which released the knob panel on the front and tipped that forward to access the timer device. Released the locking tab and spun the entire timer counter clockwise until it released. Pulled ea
... Read morech connecting wire off and immediately replaced it on the new timer so I didn't mix up the order. Once wires were attached, I replaced timer turning clockwise until it locked in place. Re-positioned front panel and replaced back panel installing screws. Replaced dial and dryer was ready to go!
Read less
Cindy from CHARLOTTE, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace timer
took back off dryer, removed one screw with Torx wrench securing timer, removed one wire at a time from old timer placing on new timer to ensure correct wiring, put timer back in place tightening the one screw to secure. Took less than 10 min. Works perfectly and I saved myself $200 repair bill from Sears, the total for buying my parts a
... Read moret this site about $80. Well worth doing it yourself.
Ordered & received new Timer & Knob. Disconnected dryer from power. Located screws on back of dryer console & removed screws so console could be tilted forward.Used cell phone to take picture of timer with connections to keep track of where to reconnect wires. Unsnapped connections to timer. Removed old timer and attached new ti
... Read moremer. Attached new knob to front of console. Plugged dryer back up to power and tested by turning new knob. Reattached console with screws. Done!
Read less
GEORGIA from SAN DIEGO, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer mechanism on Dryer was dead
I followed a YouTube video demonstration, which explained how to open the Dryer console, disconnect eight different wire from the old, malfunctioning timer mechanism, remove the old timer, and install the new timer, reconnecting all of the wires to terminals on the new timer.
Dryer began shutting off before timer had come to the "off" position.
I first removed the the timer knob and the other ones from the front of the control panel. Then I removed the three screws that held the rear access to the control panel. Disconnected all wires to the timer keeping written info to which wires went to which terminal. The replacement timer was exactly like the original in the placement a
... Read morend designation of the terminals. I then twisted the bad timer out of the plastic holders, placed the new one and twisted it in place, and replaced the wires. I then replaced the screws in the rear of the panel and replaced the knobs. It did not take much longer than writing this. Very easy and I am completely satisfied.
Read less
Warren from KEITHVILLE, LA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
27 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Harry
December 24, 2017
The picture of the replacement timer is not identical to the timer in my dryer. It has an extra terminal which i would not be using.
For model number DBLR333GG1WW
Hi Harry,
Thank you for your question. According to the model number of your dryer, this would be the correct timer for your appliance. So it should work for you without any issues. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Eileen
May 7, 2018
The knob wont turn on my dryer, I have to use pliers to turn it on and check on it because I don't know which cycle it's on. What parts do I purchase?
For model number GTDP220GF0WW
Hi Eileen, Thank you for the question. I suggest replacing the Knob, Part Number: PS8769912. If you can still operate the switch with pliers, the knob should fix the issue. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Rod
January 7, 2022
I recieved the new timer, however, the new timer only has 5 connections the old timer has 7 connections. I have been told that you don't need all 7 connections. Okay, so what do you do with the extra wires? Can I get an updated wiring diagram? Need some guidance on what to do.
For model number HTDP120GD0WW
Hi Rod,
Thank you for your question. We have included a link to one of our YouTube videos that you may reference on how to install the timer. The dryer in the video may appear different from yours, but it will give you a general idea on how to install the part. If you need more information, you will need to contact the manufacturer. We hope this helps! Good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
MIGUEL
December 6, 2018
Hello, i do not see my model number listed. Which timer and timer knob should i use. Thanks.
For model number HTDX100PD6WW
Hello Miguel, thank you for your question. The timer knob is part number PS1482196 and the timer is part number PS9491767 for your unit! Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Georgia
August 26, 2019
Does this part also include the black piece which extends out through the front panel, connecting to the knob?
For model number TMD1CM11
Hi Georgia, thank you for your question. Yes, it does. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
PEDRO
September 16, 2019
The one i get in picture is diferent as my
For model number TMD1CM11
Hello PEDRO and thanks for writing.
We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bradley
March 13, 2019
Hi, I have a Hotpoint clothes dryer. I need to replace the timer and knob. The model number of the dryer is: HTDX100EM0WW (at least i think it is the model number). What part do i need to replace the timer with?
Hello Bradley, thank you for inquiring. For model HTDX100EM0WW, the Timer is part PS8746223 and the Timer Knob is part PS1482196.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Hilton
March 8, 2018
Is it possible to replace just the rotary start switch on this timer?
Hi Hilton,
Thank you for your question. The timer does not come in different parts unfortunately but a rotary start switch is generally a different part from the timer entirely. If you have your model number there you should be able to find it underneath your model information. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Connie
September 9, 2022
Hi!
Do you sell the dryer knob for this discontinued GE dryer - Model# DVLR223EG7WW? Also, the machine has been making a lot of noise recently. Does that mean I need to replace it since it's so old?
Thank you
CW
For model number DVLR223EG7WW
Hello Connie, thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is part number PS1482197.
If your washing machine is making a noise, it indicates that the issue is probably with the Drum Bearing Slide, part number PS755842. If that is not the problem or if you have already fixed that, then the problem would be related to the Front Drum Bearing, part number PS960316. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
Need to replace the timer and knob for the dryer. Do you have these parts available?
For model number DWXR483EG7WW
Hello Charlotte, thank you for your question. The timer is PartSelect Number: PS9493080 and the timer knob is PartSelect Number: PS1482197. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
