Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS897438
The mounting brackets are sold separately.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This vent grille mounts on the top of the microwave above the door.
The vent grille mounts to the top of the microwave, above the door. If you notice that your vent grille is damaged, or your door is not closing properly, you may need to replace the vent grille. This vent grille is black in color and is made of plastic. This part is approximately 30 inches in length, by 3.5 inches in height. This part is sold individually and can be used on stainless models. Many of our customers have rated this repair as easy. To complete the repair, simply unscrew the damaged vent grille, and screw on the replacement part.
This white plastic vent grille mounts on the top of the microwave above the door, and covers components inside the microwave while allowing airflow through the slats. If the door on your microwave will not close properly, the vent grille could be at fault. If you notice that the vent grille is discolored, cracked, or broken, or if the mounting brackets on the grille are damaged or broken, you should replace the part. To replace the part, you will only need a Phillips head screw driver. Make sure this part is compatible with your microwave before ordering. This part does not include the screws used to mount it to your microwave.
Didn't take a genius to see how to replace the vent grille, even for a 73 yr old female. However, instructions would have been nice as it took me a while to realize I needed to remove the old brackets in order for the new grille to fit.
Help other customers find the most helpful instructions.
Were these instructions helpful?
First I removed the 2 old screws that had the broken hinge peices in it. The I open the microwave door, snapped in the new peice and put in the two new screws. That was all it took!
The new vent popped right in. Screws easily secured. Same size. Same color. Good as new. Was very simple to do.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.