BBB A-Plus
895789-1-M-Whirlpool-2188831-Start-Device.jpg
895789-1-S-Whirlpool-2188831-Start-Device.jpg 895789-2-S-Whirlpool-2188831-Start-Device.jpg 895789-3-S-Whirlpool-2188831-Start-Device.jpg

Start Device

PartSelect Number PS895789

The start relay briefly kick starts the compressor, and then shuts off as soon as the motor gets up to speed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not start
In Stock

  • Compare At

    $59.28

  • You Save

    $9.88

  • Your Price

    $49.40
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-3 of 3

 

7 of 11 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customerterry from farmington MO

Compresser would not kick in, it would click on and off.

Unplugged the starter from compresser and put the new part in and all worked. Great service and I like the OEM parts not aftermarket. Will definately do service with you again. Thanks for making my life easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used

    • Start Device

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerERIC from WYTHEVILLE VA

Freezer not cold, buzzing noise followed by a click then nothing from compressor, repeats every few minutes

Replaced the start relay, simple unplug old start relay and plug in of new one. Use care unplugging old one as it has 3 pins from the compressor that plugs into it and it must be carefully pryed loose with a flat screwdriver under it to prevent breaking one of them.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

    • Start Device

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerPeter from Pahrump NV

The part went bad and needed to be replaced

Unplugged the bad one and plugged in the good one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-3 of 3