895734-1-S-Whirlpool-2180353           -Ice Dispenser Door Chute
895734-1-S-Whirlpool-2180353           -Ice Dispenser Door Chute 895734-2-S-Whirlpool-2180353           -Ice Dispenser Door Chute 895734-3-S-Whirlpool-2180353           -Ice Dispenser Door Chute

Ice Dispenser Door Chute

PartSelect Number PS895734

*Please note, this door chute is no longer being manufactured with a heater.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door sweats inside or outside.
  • Leaking water.
  • Ice maker won’t dispense ice.
  • Compare At

    $10.81
  • You Save

    $1.80
  • Your Price

    $9.01
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Ice Door Kit

Part Number 897356

This kit includes the ice door, support, spring and delay. The heater ribbon is no longer attached - the heater is no longer needed.

$49.60
In Stock

Torsion Spring

Part Number 2352407

Found in the dispenser section of your appliance. Can also be found in the ice door kit.

$24.00
In Stock

Dispenser Door Pin

Part Number 329681

This dispenser door pin comes with the washer.

$3.96
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 4 reviews What's this?
1-4 of 4
 

10 of 13 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers

CustomerJeff from Parchment MI

Water dispenser not working, ice dispenser chute icing up

I removed the outer ice/water dispenser cover following directions I found on-line (push down and gently pry out at the bottom). I then removed several nut-head screws which were holding a plastic plate which had the door light and electric control wiring mounted in it. Behind that I found a broken tab on the Control Bracket which was why my water dispencer was not working and I found the chute door for the ice maker was chewed up which allowed warm air into the chute and was causing my ice build up problem. Replacing the Control Bracket was easy. Just note how things come apart. Putting the chute door in was a little more complicated, but again, note how things come apart and you should not have a problem putting it back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 12 people found this instruction helpful

Parts Used

  • Ice Dispenser Door Chute

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerSteve from Metairie LA

Ice door leaking

Remove the unit cover by unsnapping from the bottom. Remove the face plate on the switches. The ice door simply snaps off the closing mechanism. The problem I have is that the original door included a heat trace element (keeps the back of the door warm to limit condensation). The new part was simply a new seal. I clipped the leads to the het trace (turn off the fridge before you do that) and put in the new door. When the heat ids on in the house there is no problem with condensation but on warmer days its pretty bad. I cannot find a replacement part with the heating element and have contacted Whirpool. THey haven't responded as of yet.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 13 people found this instruction helpful

Parts Used

  • Ice Dispenser Door Chute

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerMurali from Rochester MN

Worn out door chute

Pry open the front dispenser outer cover. Remove a screw holding ice door dispenser unit, remove old door chute, remove and place coil kind of stuff (connecting to panel) old chute to new one and reinstall.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

  • Ice Dispenser Door Chute

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerTahir from Davie FL

Ice maker not making ice

I did exactly what was mentioned on your web-site done by other customers when replacing the Dual Inlet Water Valve PN 429001 (Order # 2246307) but no water is going into the ice maker. The ice maker itself works fine. When put water by hand I get my pieces of ice. Please advise? Martin

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4