As per the manufacturer, this part includes the lower door gasket which is NOT sold separately.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD31X10042 replaces these:
AP3711860, 1088705
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
ROBERT
March 17, 2018
How do i replace the inner door? Is it difficult?
For model number PDW8200N00BB
Hello Robert, Thank you for your inquiry. You would just need to remove the torx head screws from the panel, then disconnect the wire harness that goes to the soap dispenser inside. Make note or take a picture of how the harness connects. Also undo the screws that hold the harness that goes to the control panel, you may need a nut driver for this. Next pull out the soap dispenser (we have a video for this under part# PS958966) and take the vent cover off. Transfer the pieces to the new panel, reconnect the harness and screw the panel back into place. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
ROBERT
March 16, 2018
Is the inner door hard to replace?
For model number PDW8200NOOBB
Hi Robert,
Thank you for your question. There is a video on our website that you can reference on how to install the . The dishwasher in the video may not show exactly like the one you have and the part being installed is the outer door panel, but it will give you a general idea on how to install the part. You will find the video under part number PS3418317. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Judi
December 1, 2017
After running the dishwasher there are many small white particles under the door on the floor. They appear to be a kind of styrofoam which I assume is the door insulation deteriorating. There is no water leakage - yet. Looks like insulation panel no longer available. Is this the part I need?
For model number PDW8280J10SS
Hello Judi,
Thanks for your question. It is possible the door insulation is deteriorating and would as such require the inner door panel to replace; however, there is also a white styrofoam piece known as the block foam under the pump which may have deteriorated as well.
I hope this helps.
I just spoke with a representative at www.geappliance.com to ask about a replacement part for my dishwasher. The bottom door gasket has popped off. She gave me the replacement number for that part: WD31X10042. It was a complete inner door replacement for $278.88 + S&H. I explained I only wanted the lower door gasket and she said I have to buy the entire inner door. I think that is bordering on absurd. Can you please advise me how to get the one I have reattached or a replacement.
For model number PDW8500J00CC
Hi Peggy, thank you for asking. The door gasket you are looking for does not come separately, you may have to order the complete inner door panel, part number PS895006. This part includes the lower door gasket. If you need help placing an order, customer service is open 7 days a week. We hope this information is useful!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
