890601-1-M-Whirlpool-8531964-Lint-Filter.jpg
890601-1-S-Whirlpool-8531964-Lint-Filter.jpg 890601-2-S-Whirlpool-8531964-Lint-Filter.jpg 890601-3-S-Whirlpool-8531964-Lint-Filter.jpg

Lint Filter

PartSelect Number PS890601

This kidney shaped lint filter screen has a solid bottom with no cover.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Takes too long to dry.
  • Compare At

    $35.40
  • You Save

    $5.90
  • Your Price

    $29.50
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Lint Filter Cover

Part Number 898127

This cover is used on kidney-shaped lint filters with no hole located inside the drum.

$30.18
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 7 reviews What's this?
1-7 of 7
 

16 of 22 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKevin from Seattle WA

Lint filter screen was broken

replace lint filter with new part. Great service and quick delivery! Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 11 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsSocket set

CustomerWilliam from Glen Burnie MD

In the middle of changing loads there was snapping and sound and drum stopped turning.

I was hopeful it was the belt. But, I had no idea how to get to it. I used the model no. and looked on line for pats and schematics. That gave me a sense of what to do. I started at the rear and removed the back panel. It was like peeling an onion because then, I wasn't sure what to remove next. So I just kept removing nut head screws until eventually I had loosened the sides, removed the top and discovered the front lifted up and off (no screwed attachment.) There's grounding wire that must be detached. Don't forget to re-attach. Without proper grounding you could be electocuted! I was careful to remember how it was attached. To get to the pulley, which is on the front, I had to remove the drum. I found the snapped belt. The pulley is held in place by tension from the belt so, once the belt goes the pulley detaches. I tried to find the belt locally the following week but was unsuccessful. I found the part on-line and had it in four days. It was tricky getting the belt and pulley in place. I persevered.
The parts ( I replaced the fliter that needed replacement for years too) came with installation instructions. Its possible I did not have to disassemble as much as I did. Oh well! Although I'm fairly mechanical, I'm still pretty proud to have been able to do it and save the cost of a repairman.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver

CustomerALLAN W from CYRUS MN

Belt broke & renter tried to fix without my knowledge

When the belt broke my renter tried to fix it with duct tape and in the process the idler pulley either broke or somehow got lost. When I began to fix the dryer with a new belt,I discovered the idler was gone. SO, not knowing what it looked like was a problem. Going to the PartSelect web site I was able to see the exploded views of the whole dryer and pick out the right repair items. Really worked slick. Thanks. Allan W. Rutter

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLawrence from Hull MA

Lod and heat caused cracks

replace basket with new one snapped in

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJane from Buckeye NV

Original lint filter frame broke in several places

Simply put it in the exhaust hole.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customershirley from King Ferry NY

Filter shot

part fit perfect

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 4 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerHELOISA from BOCA RATON FL

Was too old

I just changed for the new one! 2 seconds.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-7 of 7