Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS890597
The drain hose is black in color and made of flexible material. This is a part for your top-load washer. The hose measures 57 inches long. This part moves the water out of the washer and into the drain. If this parts cracks or becomes damaged it will leak during the drain cycle of your wash and you may find water on the floor. To access the hose, you will need to move the washer away from the wall to get to the back of the appliance. There will be two screws holding it in place that will need to be removed.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
This drain hose support clip is a piece for your washer. The purpose of the drain hose support clip is to hold the drain hose in place by attaching to a cabinet. This piece is off-white and is roughly 3.5 inches long, almost 2.5 inches wide, and less than half an inch thick. To install this piece onto your washing machine you will need a quarter-inch nut driver. Before starting this repair, make sure to disconnect the power source to your washer, as well as the inlet fill hoses.
The repair was an easy fix. Since the washing machine was already away from the wall, all we had to do was push(in a screwing motion) the hose in the back of the washer. It sealed right up and we were doing laundry 15min later.
Help other customers find the most helpful instructions.
Were these instructions helpful?
The part came after 2 days..terrrific.. upon receipt, i attached the new one to the back of the washer and screwed. it all took about 5mins. My washer is back in business. I am very happy abouit it.thank u.
Replace with new hose.
I took the old hose off and replaced it with a new one!!It was an easy fix
Determined the drain hose on the back of the machine was leaking, due to my dog chewing on the hose. Replaced the hose with the new one, locked the dog out of the garage where the machine is located, problem solved.
Just traded out the hoses and installed washer and started washing. Also got the replacement hose in a very timely manner, in turn only without washer for 5 days total. Thank You
After noticing the leak, I moved the washer out to try to find the source. In the process, the Drain Hose Extension broke in two. As an emergency repair, I put the two halves together with duct tape. After running the washer again to try and find the leak, I discovered that it must have been the Drain Hose because now there was no leak. I then ordered a new one from PartSelect and replaced it with the repaired item.
I took the two screws out that was holding the bracket and hose in place. I then pulled the hose out and then had a little bit of a hard time taking off the bracket (it was plastic and felt if I bent it to hard it would break) wiggling it down to the end of the hose. Re inserted the hose attached bracket, and I was done. It would have cost me a lot more then $20.00 to have a repair man come in and fix it. Love the service, delivered in two days. Will use them again.
R & R drain hose The staff at parts Select are one of a kind, my order came before expected. Thanks Parts Select
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.