890597-1-S-GE-WH41X10096        -Drain Hose - 4 1/2' Long
890597-1-S-GE-WH41X10096        -Drain Hose - 4 1/2' Long 890597-2-S-GE-WH41X10096        -Drain Hose - 4 1/2' Long 890597-3-S-GE-WH41X10096        -Drain Hose - 4 1/2' Long http://www.partselect.com/Schematics/GE/00110774i02.gif

Drain Hose - 4 1/2' Long

PartSelect Number PS890597

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Leaking.
  • Will not drain.
  • Compare At

    $14.72
  • You Save

    $2.45
  • Your Price

    $12.27
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drain Hose Clip

Part Number 270508

This clip holds the drain hose to the back of the washer.

$3.62
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 35 reviews What's this?
 

3 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Henry from Merced, CA

Drain hose replacement

Put the drain hose clip on (it will take squeezing but the hose will pass through). There will be a groove that whose width spacing is similar to the clip. Once that's on, insert hose and screw in the clip.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used:
  • Drain Hose - 4 1/2' Long
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: kartik from radnor, PA

Drain hose had a hole in it

used a socket to unscrew the clip. pulled out the old hose, slid the new hose into the clip and screwed the clip back on. all fixes should be this easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used:
  • Drain Hose - 4 1/2' Long
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Truett from Kennesaw, GA

Hose had a small pin hole. Leaked.

With screwdriver, I removed screws holding old hose in place. Attached new hose and screwed into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used:
  • Drain Hose - 4 1/2' Long
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Mohammed from Berkeley, CA

Drain hose was leaking

Surprisingly easy. I took the screws off, then pulled off the drain hose. I then inserted the new hose, and put back the screws. Amazing quick!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: James from Kennard, TX

Drain hose leaked

i removed 2 screws , pulled old hose out and put new one in.5 minutes,done.

Help other customers find the most helpful instructions.

Were these instructions helpful?