Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS890597
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
This clip holds the drain hose to the back of the washer.
R&R Leaking/Damaged Hose and replaced it with the new one. One thing to be aware of is that after removing screws from the discharge hose upon removing the damaged one there was some water that did not expel from the unit so there was about a cup of water that came out. After removing the leaking hose you will need to remove the retaining plastic piece so that it can be placed on the replacement hose. Or if you ordered one put it on the hose so that it can retain the end of the hose in the washer. The anti-siphon clip is located about half way up the back of the washer it simply clips in place.
Help other customers find the most helpful instructions.
Were these instructions helpful?
After going to the store where I purchased the washer which did not have my part, got online to this site and received the exact part I needed promptly. This is not the first time this site get me out of a bind! All I needed was a nut driver and five minutes of time.
Remove two bracket screws. Removed hose. Put new hose in place using same bracket and screws. inserted end of hose into washer drain. Secured hose to cold water hose with two zip ties.
Removed the timer nobs on front and the smaller nob was broken , took the back off the control panel removed screws disconnected wiring harness pulled out timmer . Replaced those parts , the drain hose on the back took the 2 screws out puled the old hose out and installed new one the washer runs perfect thank you much glen haskell
Pulled washing machine away from wall. Cut tie strap on old drain hose. Used socket set to unscrew old drain hose clip and pulled old hose out of washing machine. Inserted new hose clip on end of new hose and inserted into washing machine. screwed hose clip onto washing machine. Pushed washing machine into place and tied hose to wall with new tie strap.
This was the easiest repair of a drain hose I have ever done. Thought I would need a "stubby, and hose clamps, but didn't. Just screwed the clamp to the back of the machine, and snapped the hose in the opening. clicked in three times to seat and thats all there was!
I removed the screws/ bolts wtth a pair of pliers, attached the new clip onto the hose. ( I did have to push quite hard and was worrried I may break it) Then I screwed the clip back onto the machine. It may be good to include new screws in the bag with the clip, mine were pretty rusty after the machine had leaked.
Our daughter connnected this hose herself and was so proud, as she had never attempted a repair before. It must have been a fairly easy task. Thank you for the fast service, I ordered on Thursday and received it on Saturday of the same week! Outstanding service.
It was really easy to replace i removed the old one & sliped on the new one.
I went to big box stores for a hose, but they only had generic parts that did not fit. I went to a plumbing supply house and they did not carry it. I went to an appliance store and they wanted $30 for the part. I went to your website and paid $18 including shipping. Thanks for making my wife happy.
after reading repair stories, decided I should take front panel off and see where leak was coming from. taking the panel off was real pain but well worth as inside was dry! so I looked again and discovered a pin hole in drain hose that only leaked when tub was full. while I had panel off I noticed tub dampening straps were broken so went ahead and ordered those parts too.
installed new drain hose and clip; service on the parts shipment was great.
replaced drain hose and the water leak stopped. i could not see a hole in the old drain hose and thought i needed a new clothes washer but since a new drain hose was under $20. including shipping I figured it would not hurt to replace the old drain hose first. There must have been a microscopic split in the plastic drain hose because now it does not leak a drop. it was easy to replace and only took about 10 minutes from start to finish. Thanks.
took old hose out and put new one in.very easy
The repair was an easy fix. Since the washing machine was already away from the wall, all we had to do was push(in a screwing motion) the hose in the back of the washer. It sealed right up and we were doing laundry 15min later.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.