Quick Question!

Have you ever purchased from PartSelect.com before?

890554-1-S-Whirlpool-WP8053334         -Rear Drawer Glide
890554-1-S-Whirlpool-WP8053334         -Rear Drawer Glide 890554-2-S-Whirlpool-WP8053334         -Rear Drawer Glide 890554-3-S-Whirlpool-WP8053334         -Rear Drawer Glide http://www.partselect.com/Schematics/Maytag/ZIAURLBK.gif

Rear Drawer Glide

PartSelect Number PS890554

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t close.

Compare At

$9.12

You Save

$1.52

Your Price

$7.60
Order within the next 1 hr and 30 mins and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 8 reviews What's this?
1-8 of 8
 

20 of 22 people found this instruction helpful

Parts Used:
  • Rear Drawer Glide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: John from Jamestown, OH

Drawer broke and annoying my wife

screwed in the new glide by taking out old broken one and screwing in new one. wife happy now.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Tracy from Green Cove Springs, FL

3 burners had stopped working and drawer glides broke.

Removed the old burners and lifted top assembly. It made it easier to work with the wires by removing the top, easily remove the screws holding the wire harness and ground wire, then slid the top to the right and it came right off. splicing the wires in was very easy and all the parts required were sent with the kits. reassembled stove and it worked like a champ. The drawer was very easy as well the plastic glides were all broken or worn out, and one screw each to replace. like a new oven now, saved at least 300 by not purchasing a new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: David from Fairborn, OH

Broken bottom drawer glide and missing rivet on drawer front panel

Removed the old, broken drawer glide by removing the Phillips head screw. Then placed the new glide into place and fastened with the existing screw.

The rivet on the top of the bottom drawer front was missing. I lined up the drawer front with the supporting bracket behind it and inserted the rivet. All you have to do is tap the top of the pin in the center of the rivet to lock it in place. No rivet tool is needed. That should be explained in the parts listing because I bought the rivet tool before I realized I didn't need it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Shane from Palatine, IL

Broken drawer glides

Simply removed the bottom drawer, unscrew the old broken glide, and attach the new glide. Simple and no hassles.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Rear Drawer Glide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ed from Maple Grove, MN

Broken rear drawer glide

This was a very smooth repair. In total it took about 5 minutes. The pot drawer below the oven wasn't gliding like it once did. After I replaced the glides it works like new. Please note, if you are going to replace one side go the next step and replace both to provide balance to the drawer.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Rear Drawer Glide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: John from Maysville, GA

Broken rear stove drawer glide

Removed drawer, after removing the 50# of junk in the drawer, Used screw driver to remove screw that holds glide to drawer and then place new part into place put screw into hole and tightened screw. Replaced drawer and told wife not to put 50# of junk back into the drawer.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Rear Drawer Glide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: David from Port Orange, FL

Door glide broken

removed the old ones.then installed the new ones.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Rear Drawer Glide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Leona R from Louisville, KY

Slides on lower drawer were broken

I used a phillips screwdriver and replaced the part with one screw.Very easy and replaced my lower drawer under my oven,it tool about three to five minutes at the most and my drawer works fine now.Thanks for the instruction video on line, it really helped.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-8 of 8