124 of 240 people found this instruction helpful
- Water Dispenser Fitting and Tube Assembly
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
CustomerConrad from Tucson AZ
The water dispensor tubing had become brittle and broke .
REMOVED THE FACE PLATE. REMOVED A FEW SCREWS AND UNPLUGED A FEW ELECTRICAL CONNECTORS AND PULLED APART. REMOVED THE HOLDING BRACKET AND CLEAR TUBING FROM DOOR. CUT NEW TUBING AT AN ANGLE TO PUSH THROUGH CONDUIT. REINSTALLED NEW BRACKET AND RE-INSTALLED ELECTRICAL CONNECTORS. SNAPPED FACE TRIM ON AND BLEED AIR OUT OF SYSTEM.. WATER RAN GREAT.