Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS885561
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
Remove 2 screws on opened edge of door. Carefully use putty knife to loosen and slip interior door unit from exterior door cover. Be careful, your working with plastic. You should be able to have a large enough cap at open edge at bottom of door to reach in with philips screwdriver. The bottom handle screw is cover by a dense padding. You will need to use screwdriver point to move padding away from screw. With left hand holding firmly on front outside of door apply pressure to screwdriver and backout the bottom handle screw. Assemble new handle in reverse order. Apply even index finger to thumb pressure to reassemble interior door unit into door cover.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Hello,I unscrewed the two screws on the edge of the door. Then gently wiggled the door frame (front cover) loose (this was the first time its been off so there was grease build up in places that I never saw) once off just unscrewed screw and put back on microwave cover screwed outer screws in and good as new!
Had to remove front panel to get at bottom screw. That was not explained in instructions how to pull panel. Once it was removed easy to replace handle.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.