884734-1-S-Whirlpool-8009              -Light Bulb - 40W
884734-1-S-Whirlpool-8009              -Light Bulb - 40W http://www.partselect.com/Schematics/Maytag/1913.gif

Light Bulb - 40W

PartSelect Number PS884734

Manufacturer Part Number 8009
Manufactured by Whirlpool

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $3.04
  • You Save

    $.51
  • Your Price

    $2.53
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 53 reviews What's this?
 

5 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: David from Flushing, MI

Broiler would not light

Removed the old ignighter by removing 2 screws. Romoved wire shield from the back of the oven, 1 screw. Cut wires close to the base of the ignighter. Stripped the wires and twisted together with wires on the new ignighter and secured with the wirenuts that came with the install kit. Pushed the excess wire and wirenuts into the hole in back of the oven and replaced the shield. Replaced the screws mounting the ignighter to the burner.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Roy from Rocklin, CA

Bake element wore out. Replaced bake element.

Very easy. 1. Turn off power to oven. 2 move the adjustable grills out to gain better access. 3. There are two phillips head screws that hold a bracket to the back of the inside oven. Unscrew both screws. 4 pull the bake element out about 6". This exposes the two electrical connections. 5. Use a plier and wiggle the slide on connector off of the old bake element. 6. With your fingers, slip the old connectors onto the new bake element. 7. Slide the element and wires back in the insulated pocket. 8. Screw both screws back in. 9. Turn on power and make your wife back you chocolate chip cookies just to "test". Sit in an easy chair and enjoy your cookies. If this took longer than 30 minutes inclding baking the cookies, it took you too long. If the cookies are not good, replace the wife. May take a little loger though :)

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: LOUIS from FREEPORT, TX

Oven light would not work, old bulb broken

Had already removed back covers and disconntedted power. When io received parts I replaced them in reverse oder I had removed them. Took me longer to replace back covers because of my bad diabetic hands. Thanks very much, yopu savbed me a bunch. God bless you and yours, god bless america.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Alfred from Tacoma, WA

Light socket was burned for some reason, may have been wrong bulb previously.

I removed the cover over the light and disconnected the wires and replaced the socket.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Alex from Sun City West, AZ

Evaperator section encased with ice

being a side by side unit, removed back cover in freezer section, allowed built up ice to melt off, exposing evaporater coils and deforst heaters, removed screws holding upper and lower heater and remove thermostat cliped to coil, unplugged wire connector and reversed insulation of unit. it was vary easy and only tools used was a 1/4 inch nut driver and phillipshead screw driver.

Help other customers find the most helpful instructions.

Were these instructions helpful?