| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsWrench(Adjustable)
CustomerGladson from Orlando FL
I just change a filter
It's very simple and fast to make.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customervictor from ryan OK
Install new filter
Remove filter, and replace with new one.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerEl Ray from San Jose CA
Ice maker not working
After checking the codes, they indicated that the emmitter board was inoperative so I changed the control boards. Very simple and straight forward (about 10 minutes). After changing the boards I double checked the codes, this time the codes indicated the control boards were functioning properly but still no ice. A friend suggested the water feed line could be frozen and defrosting the freezer could possibly resolve the problem. My freezer is full and it will take time to empty it to continue. Any other suggestions in the meantime? Installing the new water filter took about a minute and is working properly.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerOSCAR from BEAVERTON OR
Door bins onrefrigarator were cracked anf filter was due to be replaced
Just Snapped out the old bins and snaped the new ones in . Have not replaced filter yet but it also is a snap.
|
0 of 3 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsPliers
CustomerMELBA ROSE from PLEASANT VIEW TN
Change water filter in refrigerator
ACCORDING TO DIRECTIONS ON CYLINDER.
I WILL PROBABLY NEED ANOTHER FILTER AROUND JUNE 2012.
|
0 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerLarry from Gladstone MO
Water filter won't turn to right to lock
put filter in &turn to right to lock in place. I can't get the fliter to go in & lock for some reason. I have changed the filter before realy easy not this time.
|
0 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDelores from Tallahassee FL
No problem, just needed to replace my water filter
Pull the old filter out and replaced it with the new fliltler
|
0 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJacquelyn from deer park TX
|
23 of 641 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerHarry from Audubon PA
Ice maker stopped making ice
After researching the problem on parts select I found that there were several reasons why the ice maker would stop working. The number one reason was the electronic sensors fail,these tell the ice maker when ice bucket is filled. The light on the electronic eye will blink a code to diagnose the if there is a problem with the sensor. In my case the sensor was bad(the red sensor light would not stay on). The light transmitter is on the right and the reciever is on the left. First make sure there is nothing blocking the holes by cleaning them with a "q" tip. If they still don't work and the blinking code indicates failure them they need to be replaced.The sensors are behind panels on the left and right; each panel had 3 screws that need to be removed. First shut off power to the frig. Once you remove the screws you will find a quick connect attached to a electronic board on each side. Unplug each board and replace with the new part. Replace the panels and turn on the frig to test. The instructions in the parts box will tell you the light codes that will indicate that the boards are working. One note, I did this repair , the sensors were working and I did not get ice after 30-60 minutes.I found out that the water fill tube(black tube at the top of icemaker) was clogged with frozen water thus the ice tray never filled. After clearing out the ice with a small pipe cleaner the ice maker tray fill with water and the ice maker made ice on schedule.
|
22 of 641 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerBarry from Danville VA
Needed new water filter
very simple turned filter 1/4 counterclock wise removed insert new filter turned 1/4 turn clock wise finished
|
21 of 639 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerBetty from Petaluma AL
Needed new water filter...red indication light on.
Turned the icemaker off (lifted the wire up inside the freezer). Used a pliers to turn and take the circular cover off..located on the bottom of the refrigerator grill..it was tight. Pulled out old filter, put new one on..thats it! Simple. We had to reset the red light inside the refrigerator..pushed it, heard a beep, pushed again, got the green light.
|
21 of 639 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerDennis from Chocowinity NC
Replace filter that had expired
Twisted filted out from bottom of frig; removed cap and placed on new filter and pushed filter into bottom of frig and twisted clockwise to lock into place. Remove a few qts of water to clear new filter and reset light and was finished.
|
21 of 639 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRowan from Miramar FL
Ice guide broken, filter needs changing
This was a very easy repair. The ice guide has 3 pegs that just clicked into the opening to position it. The ice and water filter was easy as well. I turned the water off because I was not sure if the water would leak when I removed it.
One thing is to make sure you run the water for a while after installation to recharge the water line and to get all air out of the line, and to run the filter.
|
22 of 643 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLouis from Palm Beach Gardens FL
Replace deteriorated overflow grille
Simple replacement in 1 minute. Received exact factory part that allowed simple exchange.
|
22 of 643 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJoe from El Dorado Hills CA
Door shelves were cracked or broken
Took food off the shelves.
Removed broken shelves.
Installed new Shelves.
Could not replace filter because I was not smart enough to buy the correct filter. I returned the filter and cracked open a beer.
Job Completed!
|