| |
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJay from Seminole FL
The filter was due for replacement.
Simply turned the original filter counter clockwise, pulled it out and discarded it. Then I inserted the new filter and turned it clockwise. Repair done.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJOEL from LAKE WORTH FL
Filter needed replacing
I/4 Turn and pull out old filter. Insert new filter and turn 1/4. Shipping time from Partselect was unbelievable, one (1) day. Highly recommend this company !!! This site is a great help to the do-it-your-selfer. Thank you.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerIra from Wauconda IL
Needed to replace water/ice filter
The hardest part was getting the model number. (My vision is not that good.) After I got the number, the rest was cake! In less than a week, I had it ordered,shipped, delivered and installed!
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWilliam from Attleboro MA
Red indicator light on frig was on indicating that filter needed to be changed.
As shown in your video, very easy, no tools required.
|
2 of 6 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJerry from Hephzibah GA
Will not make ice
turned off the machine. removed the ice maker door. removed the wiring harness cover. press on locking clips, removed ice maker. disconnect wiring harness. removed three screws from cover and installed on new ice maker. installed in reverse order of removable.
|
2 of 6 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerBarbara from Oklahoma City OK
Brokenglassshelf,broken crisper
The glass shelf was broken when I was cleaning the refrigerator. The crisper had broken with daily wear and tear.I was tired of seeing a crisper with duct tape and a shelf replaced by cardboard. I looked online and found the most reasonble prices at this site. My order came extremely quickly! It was so simple to replace the needed areas, including a new water filter. I would recommend this site to anyone!!
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
Customerkenneth from gardiner ME
Stripper arm broke
I had to disassemble the unit. After it was out I unpluged the wires and removed the broken ends of the stripper. Most of my time was spent figuring out how everything worked. I installed the new arm and slipped the unit back in place. It works perfectly. I could do it in under 30 minutes now. The cost savings is well worth the effort.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
Customerjoe from Bel Air MD
Lower hinge on door, watrer filter and ice/water tray
The notches that create the closing power on the lower hinge was worn out. A few bolts at the top of the door and it was off. One nut to hold the plastic hinge and it was on. Door works perfectly now. Water filter was a breeze and the tray where the ice and water dispenser is was even easier. Parts came incredibly fast and after an order for $75 total and my repairs were done.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerJohn from Frisco TX
Ice maker not working
Easy plug and play repair for anyone. Sourced the part and watched the video instruction on the website. The video was spot on, the old part was removed and replaced with the new part. The video explained in detail the step by step instructions plus added what tools were required. Very simple fix and the part arrived a day early! Very satisified with the service and easy repair instructions. With a 1 being the easiest and 10 being difficult this would have a rating of 2.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerEarle from Bluffton SC
Needed new filter and broken vent grille
for the filter, removed the front fascia of the fridge and pulled out the filter. replacing the filter was very easy-slides right in. for the vent grille, it need to have the metal snaps replaced with a screwdriver and then it snapped right in.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver
Customermichael from duluth MN
My wife put a loaf of bread in ice cube holder, and broke the ice maker
Found the correct part on line,watched a how to vidieo from your web site and replaced it.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsSocket set
CustomerAdam J from Annapolis MD
Fridge door wouldn't stay closed
Removed the door with Socket set & removed the lower door closing cam, replaced it with the new one and reattached the door. Biggest part of the problem was diagnosing the part needed. I replaced the filter while I was at it.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRyan from Orangevale CA
Crisper pan was cracked
Replaced crisper pan - perfect fit.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers, Socket set
CustomerRon from Bremerton WA
Ice maker wouldn't work.
First I removed the ice tray door by lifting and then releasing the hinge. Then I used a nutdriver and socket to remove three recessed screws that are located under the icemaker. I also removed the screw on the underside which holds a plastic flange in place covering the wiring harness. Remove the plastic flange and slide the icemaker out as far as possible, then disconnect the wiring harness from the icemaker. Slide the old unit out and discard. Reverse the procedure to install the new unit. Points of frustration: Disconnecting the wiring harness--it is in there mighty tight! Also, when sliding the new unit into place, clearing the rubber water spout without breaking something is somewahat of a challenge. The unit comes out
easier than it goes back in!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerCharlotte from Sacramento CA
Fins on auger drum had broken off, water filter needed replacing
Water filter screws out and in, no problem there. The ice maker auger was a little detailed, but I removed all screws and took apart the main components. The auger assembly was reverse threaded, and the blades, etc., all came off in order. Then the old auger drum was removed, new one put on, and the auger assembly reassembled. Then screwed all components back together, put it back in the freezer, and it worked like a charm!
|