| |
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerJames from San Diego CA
No ice from ice maker
Replaced motor-modl (part #W10190935) by un-screwing 3 screws, disconnected the the electical plug, removed 3 screws that held the motor assembly to the and removed the motor and replaced with new motor but this did not fix the problem and still had no ice. Since frig was 10 years old decided to buy new one as cost to repair would probably cost a few hundred dollars. Gave frig to family member as second frig as they already had ice maker.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerStanley from Gilbert, AZ
Filter indicator in fridge displays change filter
REMOVED GRILLE CAP,TWISTED OUT THE OLD CARTIDGE. FLUSHED THE WATER SYSTEM AND TWISTED IN THE NEW,
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerA. from Huntersville NC
A drawer support wheel had broken off the lower support shelf frame making drawer opening very difficult
I removed the glass shelf and drawer, tugged on the frame to snap it out of position, snapped the new frame in place, replaced the shelf and drawer and done... So easy, a 5 year old could do it...
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerJonathon from Lakeland FL
Icemaker quit
Unscrewed 3 screws. Unplugged the old unit, plugged in the new unit. Replaced 3 screws. Made ice like new.
This was VERY easy. The kit inlcuded every conceivable wire connection pigtail. Turned out I needed none since the OEM cable was a plug & play affair.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerTina from Lawrenceburg IN
In the door ice maker coupling was broken, therefore, it would not dispense ice.
Ordered the parts, three days later they arrived. Put the coupling and the washer in place and screwed the dispenser back in place. Oh yeah, also installed the new filter that I ordered. Piece of cake.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJOHN from PALM COAST FL
Replaced water filter on whirlpool gold side by side refridgerator.
followed the instruction video,that PartSelect provided on the web site,It was very easy
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyVery Difficult
Time to do repair:More than 2 hours
ToolsWrench(Adjustable)
CustomerBurnam from Oceanside CA
Red light indicated new filter required
Removed old filter and tried to install new filter according to instructions. Was unable to rotate new filter so I could not complete repair.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerJohn from Frisco TX
Ice maker not working
Easy plug and play repair for anyone. Sourced the part and watched the video instruction on the website. The video was spot on, the old part was removed and replaced with the new part. The video explained in detail the step by step instructions plus added what tools were required. Very simple fix and the part arrived a day early! Very satisified with the service and easy repair instructions. With a 1 being the easiest and 10 being difficult this would have a rating of 2.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerChristine M from Royal Palm Beach FL
I never changed the filter
After my son-in-law told me where to change the part, I had to use pliers to turn the knob and it came right out. I replaced the filter turned the knob.
|
4 of 11 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerCarole from Greensboro NC
Broke the top of the water filter
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJOSEPHINE F from Bakersfield CA
Replace ice and water filter
remove-slight turn of filter
replace-turn and it was replace
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Wrench set
CustomerWilliam from Cincinnati OH
Ice maker stopped working
Ordered and installed new icemaker. Still didn't work. Called repairman who replaced cut-off sensor (expensive service call) Worked briefly, then stopped. Service man said new icemaker was defective. Called PartsSelect and they promptly sent another one (great service). Made ice for 12 hours and then stopped. Did nothing for 36 hours and it suddenly started working again and works fine now. Beats me.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerBrenda from Conway SC
New home with stinky water
I pulled off the filter tab, unscrewed the filter and installed the new one. It was that easy!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAlvin from Gonzales LA
Filter needed changing
All of 16 seconds. It took longer to get it out of the box than to change it. Untwist the old one, pull it out and replace the new one.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
Customerharold from sorrento FL
Filter was old
Unscrewed oldfilter and installed new. Very easy repair
|