Quick Question!

Have you ever purchased from PartSelect.com before?

8760885-1-S-Frigidaire-808602302-Lower Dishrack Assembly
8760885-1-S-Frigidaire-808602302-Lower Dishrack Assembly 8760885-2-S-Frigidaire-808602302-Lower Dishrack Assembly http://www.partselect.com/Schematics/Frigidaire/ZPXENAOE.gif

Lower Dishrack Assembly

PartSelect Number PS8760885

This white lower dishrack assembly comes with eight light-gray rollers for easy access. The dishrack is approximately 21 inches wide x 22 inches deep. The dishrack holds dishes in place during the dishwashing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack is visibly rusted or damaged, you will need to replace the part. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly. This part is also known as a dish rack or a dishwasher rack.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, KENMORE®, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Not cleaning dishes properly.

Compare At

$64.85

You Save

$10.81

Your Price

$54.04
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 44 reviews What's this?
31-44 of 44
 

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Kenneth from Sioux Falls, SD

Upper & lower racks were getting rusty

I pulled out the racks, transferred the snaps and installed the new racks, wala it was ready to go. Very pleased with the quick delivery of the parts.
Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers, Socket set, Wrench set
Customer: Lee from WILMINGTON, DE

Water pump went up, soap dispenser wouldn't close and a little rust on the lower rack.

Easy repair. pulled dishwasher out, disconnected electrical wire for safety but don't think it was required since the breaker was off (turn it on and flip the breaker for verification). Pulling the pump and replacing was easy, soap dispenser, same, easy. First time I ever worked on a dishwasher, simple. Parts were all OEM parts and most importantly were the correct parts I needed. Way cheaper than replacing the unit and I saved $150 on an hours worth of work vice paying the service guy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Mary from Philadelphia, PA

Racks had worn out.

I used the screwdriver to remove the piece in the middle top ,it came off easily. Took out the bottom rack replaced them both in about 15-20 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: JERRY from WINNSBORO, TX

Replace upper and lower racks in dishwasher

Bottom rack was simply lift up and replace with new rack.
Upper rack took a couple minutes to figure out how to take the roller brakes off and remove the nozzle. Once those were removed, it was easy to put them back on the new rack. The screwdriver was used to pry the nozzle holder off of the old rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Eb from Ballston Spa, NY

Tines were rusted. The spray arm was melted and broken

Removed the old racks and spray assembly. Matched the parts and removed the needed wheel assemblies with a screw driver and snapped them onto the new racks. The spray arm was very easy. It took removing one part and then reassembling it with the new one. Everything works good.
Parts arrived the next day. Great service. My wife is happy!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Lower Dishrack Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Donna from Scottsdale, AZ

Lower rack of dishwasher was broken from someone prying posts apart for pans between posts

Easy, hardest part was finding place like Parts Select that had what I needed. Found part promptly and now I have to cook.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Lower Dishrack Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Martha from Asheboro, NC

Bottom rack had rusted - the plates were turning rusty color on the edges

Rolled out the old rack, rolled in the new rack. Took less than a minute. THANKS!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Debra from Sherman Oaks, CA

Wheels no longer worked, rubber gone and rust

took out the old racks, disassembled the top blade and put on new top rack and put new bottom rack in!
easy

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: bob from cookeville, TN

Plastic on racks getting on dishes

ordered new racks and replaced.. very easy way to order..prompt delivery. made my wife very happy..great xmas present..haha

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Tampa from Hudson, OH

Old racks were discolored and stained

I opened the boxes (which arrived VERY quickly! thank you) and exchanged the old racks with the new racks. The upper rack had to be re-fitted with the spinning spray mechanism, but, it was very easy to changed it from installation on the old upper rack to re-installation on the new upper rack.

It was all a breeze!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Lower Dishrack Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: emily from ithaca, NY

Rack had prongs that were becoming rusty and breaking

rack came (with wheels attached,to my surprise) and we placed it in the machine - works great!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Lower Dishrack Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Karen from MENTOR, OH

Coating worn, front wheel missing.

Simple pull out, and then replaced with new unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Marc from Green Brook, NJ

Door latch broken, upper and lower racks rusted

I disconnected power to dishwasher. I removed six screws to gain access to door latch assembly. I removed two screws, which attached door latch to machine. I removed the 4 electrical attachments.
I then attached 4 electrical attachments to the new door latch. I attached new door latch to machine with two screws. I reattached cover with 6 screws.
I connected power back to the dishwasher and everything worked great.
Took aprrox. 15-30 mins to compete.
It only took three days to received shipment including day I made purchase.
I was very pleased with my purchase.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Sheila from Painted Post, NY

Lower dishrack rusted and needed replacement

Just took out the old rack and put in the new. Rack rollers were not visible on the sketch I saw when ordering. To be safe, I ordered 8 of them. When the dishrack arrived with rollers attached, I called customer service. The operator e-mailed me a return label for the extra rollers. A credit was posted within 48 hours! EXCELLENT SERVICE! Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

31-44 of 44