Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS8760885
This dishrack includes the wheels.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
Took off 2 lower screws and removed trim panel to access dispenser. 6 more screws and i was done.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I thought these were OE racks they are not. They did do the job. However, I like OE parts the difference is exactly where the fold over rack on top rack goes the tines were not there to clip on it into there was a larger gap. So it was almost the same except the most important area. Same for the cone that clips in the center of the top rack. It is not as tight a fit front to back as it should be so it moves around more. I was concerned that the jet of water from top would miss the cone but it seems to be ok. So far so good. The racks did the job dishwasher is still cleaning dishes. But aftermarket parts are almost the same just not quite the same.
took out the old racks - put in the new racks... only had to move one part from old to new on upper rack assembly.. easy! and quick -- I'm over 60 - female - arthritis in my hands -- and I could do... so can you!
Slid the old rack out, removed the silverware basket and put in new rack, and slid the new rack in. Had to use the pliers to attach a wheel that came off during shipping.
Ordered lower dish rack, which arrived fully assembled and ahead of schedule, and put it in the dish washer. Took 5 mins.
The parts came very quickly and the lower rack just slid in after sliding the old one out. The upper required removing the end stops and removing the rack. The water spout in the middle had to be removed, twisted off and then popped the holder for the spout off and attached it to the new rack, rolled the new rack in and replaced the end stops. This was done by my wife!
Just replaced the rack.
Replaced racks and removed silverware holder, glass holder and water sprayer from old rack and attached to new rack with very little trouble. The only thing different with the new lower rack, is that it does not have the collapsible racks to use for pots.
Lifted out the old unit and replaced it with the new one. First one the rollers were bent and wouldn't roll. Replacement unit was supplied for a small additional fee.
First I removed the six screws from the door panel, then I removed the old door latch assembly, there were two torx screws and four electrical connectors. I reattached the new electical connectors and screwed it back in place. Then I put the door panel back on with the screws. It was easy, my husband thought I would not be able do it.
Opened the dishwasher, removed the old rack and put in the new one. How easy is that!!!
Took the old one out, put the new one in! Soooooo hard. Lol
Pulled out rack out and put new rack in. Replacement took less time than opening the box it was delivered in.I ordered the rack late Wednesday evening and it arrived Friday afternoon. Excellent service!
Simply removed onld rack and threw it away. Slid the new rack in and it fit perfectly.
Install new rack assembly
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.