Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Rick A - November 14, 2018
Verified Purchase
Simple Repair
The video from Part Select helped. The part arrived ahead of schedule, was cheaper than the price quoted by some parts houses and worked like it was supposed to work when I installed it. Great service, great part and now to enjoy the refrigerator again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Fridge constantly cycling off/on, beeping
Bi-metal defrost thermostat tested bad, so replaced. To remove back freezer panel on this model, remove top left and right shelf pegs (use a screw driver). This will let back freezer panel slide up and out.
Control board, located in metal box above the inverter board had a bad 200uF electrolytic capacitor (bulging top) and 12v
... Read morerelay. Replaced all 5 electrolytic capacitors on the board and all 4 relays.
pulled out inverter box, opened up and located burned components in circuit board. rolled the dice bought new one and installed. the terminal leading from inverter didn't match the terminal coming from the compressor . cut both off and supplied my own junction terminal.
s. from fort lauderdale, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
42 of 71 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
January 27, 2020
Hello,
We had a power surge which caused my frig to totally lose power. I replaced the circuit board. The lights, fan, and digital display are on but the compressor does not turn on. Do i also need to replace inverter board?
For model number kssp48qkss00
Hello and thank you for writing.
It certainly sounds like the Inverter board might also have shorted. The easiest way to diagnose which part is faulty is to test the parts with the use of a multimeter. We hope this helps. Please contact us anytime if you require further assistance.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
December 22, 2019
When the inverter board is going bad does it make a clicking or beeping sound and make the condenser fan cycle on and off rapidly. The compressor is running when this happens and doesn't shut down. Also the freezer and refrigerator compartments are cold and the factory temperature settings are reached. ( 0/37 degrees)
thanks for your reply
For model number GC5SHEXNS05
Hi Greg, I think it may actually be the control board. All the symptoms seems like the control board failing. Thank you for your question and good luck with your repair!
Our freezer seems to get stuck in defrost mode? It runs fine then all the sudden it heats up in the freezer. The only way to get it back cold is to turn off the main power switch (under the top panel) for a few minutes and turn it back on. That usually gets the compressor to start up and start cooling again…. Until tomorrow?
For model number KSSS48QMW00
Hello Peter, Thank you for the question. We suggest testing the Defrost Thermostat, PartSelect Number PS11750673. The best way to do this is to remove the thermostat from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. If the values that you are getting are far off from these readings, then the sensor is bad and should be replaced. We hope this helps!
Both freezer and refrigerator are not cooling, despite the fan running continuously. It appears the compressor will not turn on after multiple attempts to power the refrigerator off and on. There is a green flashing light from the control board located to the left of the compressor. My technician suspects a faulty compressor relay after checking it with the voltmeter. Can this be the only issue? And is the relay sold as a separate component or is it bundled with the compressor?
For model number JS48PPDUDB01
Hi Frank, thank you for the question. Make sure the condenser coils are not dirty and the evaporator is not frozen over. The issue is most likely related to a faulty start relay (not available separately for your model, so you must replace the inverter board, part number PS8760019). If this does not help, you need to inspect the defrost thermostat, part number PS11749258, and temperature control board. Please reach out to customer service if you need help placing an order. Glad to be of help!
Does this part include the green LED light that flashes if there is a problem?
For model number KSSS48FMX02
Hello B, thank you for reaching out. According to our research, the inverter board that you mentioned does not come with the LED light. We hope this information is useful!
Was this helpful?
Thank you for voting!
Kelton
September 29, 2023
I just had our main circuit controller board refurbished (Core Centric) since they are no longer available on your website.
We had is sent in twice. it does not interface with the temperature controls inside the fridge (the buttons that you use to set the temperatures) Set fridge to 34 but it cools to 20 and the freezer set to 0 but cooling to -20. Each time it is doing the same thing.
The repair guy told us that it must be the interface board to the main circuit board. They want to charge another 280 for the part. I looked on your site and did not see such an extra interface board. Can you help me understand what additional board this may be? Maybe it is another name but maybe they are trying to get more $ for something they should have already fixed.
Thanks
For model number KSSC48QMS01
Hi Kelton, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the user control and display board, part number PS11740282, as it is most likely faulty and may need to be replaced. We hope this sorts out your problem!
