Quick Question!

Have you ever purchased from PartSelect.com before?

8756501-1-S-GE-WD28X10411-Upper Dishrack Assembly
8756501-1-S-GE-WD28X10411-Upper Dishrack Assembly 8756501-2-S-GE-WD28X10411-Upper Dishrack Assembly http://www.partselect.com/Schematics/GE/00111401i03.gif

Upper Dishrack Assembly

PartSelect Number PS8756501

This part includes the wheels.

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$296.52

You Save

$49.42

Your Price

$247.10
Order within the next 6 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 2 reviews What's this?
1-2 of 2
 

18 of 30 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Warren from Stillwater, MN

Top and bottom rack were rusted thru

Bottom rack - slide the old one out, slide the new one in. The rack came came with the wheels, so I didn't use the replacement ones.
Top rack - remove the rail end caps - they will likely break so order new ones. Slide the rack out. Remove the rotating spray arm and then remove all the brackets. I was able to re-use the old brackets and didn't need the replacements. Install the old brackets on the new rack, install the spray arm, and slide the new rack back into the rails. The new top rack also came with wheels installed, so I didn't use the replacement ones. Once the rack is back in the rails, install new rail end caps. Put them in sideways and facing into the washer. Straighten the caps and turn them into place. Be careful with the rail caps - they break easy and are expensive. Make sure they hold the top rack in place, and that's it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 13 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Gabriel from La Mesa, CA

The wire cage began rusting

The bottom rack just pulls out so that was an easy replacement. The upper rack required a 1/4" nutdriver to remove the sprayer from the rack and a slot screwdriver was used to remove the tab that was holding the rack to the slide arm. Total time, 10 minutes tops!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2