Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/GE/00122514i04.gif
See part 701 in the diagram
http://www.partselect.com/Schematics/GE/00122514i04.gif

Lower Dishrack with Wheels - Gray

PartSelect Number PS8756497

This dishrack includes the wheels.

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$154.99

You Save

$25.83

Your Price

$129.16
Order within the next 1 hr and 48 mins and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 3 reviews What's this?
1-3 of 3
 

19 of 31 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Warren from Stillwater, MN

Top and bottom rack were rusted thru

Bottom rack - slide the old one out, slide the new one in. The rack came came with the wheels, so I didn't use the replacement ones.
Top rack - remove the rail end caps - they will likely break so order new ones. Slide the rack out. Remove the rotating spray arm and then remove all the brackets. I was able to re-use the old brackets and didn't need the replacements. Install the old brackets on the new rack, install the spray arm, and slide the new rack back into the rails. The new top rack also came with wheels installed, so I didn't use the replacement ones. Once the rack is back in the rails, install new rail end caps. Put them in sideways and facing into the washer. Straighten the caps and turn them into place. Be careful with the rail caps - they break easy and are expensive. Make sure they hold the top rack in place, and that's it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 12 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Helga from Wayland, MA

Lower rack on my dishwasher had rusted out, due to use, wear and tear, normal use

I took out the old rack and put in the new rack. Took about 20 seconds tops. But I had thought I needed to order the wheels (8 of them) and the wheel attachments (8 of those, too) separately because when you go to order the rack, it is suggested that you buy those, too. But the rack came with all the parts I needed so I ended up returning the stud rollers. Very happy with the product and the friendly service.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 13 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Gabriel from La Mesa, CA

The wire cage began rusting

The bottom rack just pulls out so that was an easy replacement. The upper rack required a 1/4" nutdriver to remove the sprayer from the rack and a slot screwdriver was used to remove the tab that was holding the rack to the slide arm. Total time, 10 minutes tops!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3