8756214-1-S-GE-WD12X10401-COVER INTERLOCK
8756214-1-S-GE-WD12X10401-COVER INTERLOCK 8756214-2-S-GE-WD12X10401-COVER INTERLOCK

COVER INTERLOCK

PartSelect Number PS8756214

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will Not Start.
  • Door latch failure.
  • Compare At

    $3.35
  • You Save

    $.56
  • Your Price

    $2.79
In Stock
Order within the next 6 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 4 reviews What's this?
1-4 of 4
 

6 of 6 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerJAMES from MAYFIELD UT

Cover, interlock heats ups and bends causing switch problems

Ordered your new and improved Interlock cover made with better plastic (Thank You). Your new SPRING is also better. It's bigger and longer and is now the right size. (Thank You). Your parts are better than OEM. The INTERLOCK is easy to get to. The OEM one is black and you can see that it is bulged. The replacement one is Gray Speckled with white and black. You can see the improvement by just making a comparison.Just unclip the old one and clip in the new one.. Repace panel cover. Now it works and should work now for many a year. THANKS! Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJessica from Chicago IL

Dishwasher wouldn't start/reset

Very simple. Took off back cover with screwdriver. Popped off back cap found in center top inside. Replaced spring and white stick looking thing. Put black cover and then back panel back on. Instantly worked again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMaksim from Falls Church VA

Dishwasher did not start

The repairman diagnosed the problem as a control board failure and quoted a $350 bill. I self-diagnosed it as a failed interlock switch -- and found out that the switch was OK but the cover was cracked, preventing the switch from functioning normally. Total repair bill - $1.50!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • COVER INTERLOCK

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver

Customercharles from royal oak MI

A couple of retaining ears were broken from the cover allowing the the switches and plunger to move out of place

took screws from inside door panel and replaced the cover taking care not to allow plunger and spring to pop out put panel in place and screwed down

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4