http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/KEY7T6HN.gif
See part 24 in the diagram

Lower Spray Arm

PartSelect Number PS8746671

This part comes with the heat shield and the tower. It is located on the lower half of your dishwasher. Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dish rack.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Leaking water.
  • Unusual Noise.
  • Compare At

    $25.46
  • You Save

    $4.24
  • Your Price

    $21.22
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 13 reviews What's this?
1-13 of 13
 

28 of 30 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAllison from Greenville SC

Melted spray arm resulted in leaky dishwasher

Over Thanksgiving, the spray arm in my dishwasher apparently popped off and was partially melted. I remounted it inside the dishwasher, but the new hole was on the side of the arm. I think this resulted in water being sprayed directly against the door and not up through the top holes. It flooded my kitchen floor.

The spray arm pops on and off with plastic tabs (?) at the base. You can lightly pry with a butter knife or simply wiggle it off. The new one popped right on. Easiest repair EVER.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 11 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerWilliam from Pittsburgh PA

Spray arm melted to heating elment

Removed old arm from elment. then replaced with new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerYUAN from ROWLAND HEIGHTS CA

Lower spray arm pop out and broken

Only took me 5 sec, just push it in. Good as new. Thanks for the fast deliver .

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRandy from Valley Springs CA

Broken lower sray arm

Pulled the broken one off, snapped the new one on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customermatthew from Fayetteville NC

Spray arm came loose during cycle and melted onto the heating coil

Remove old spray arm and pressed the new part into place. Let the dishwasher run and the load came out very clean. Overall very pleased.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerthomas from Jeffersonville VT

Spray arm was knocked off and melted on the element

I just popped on a new Arm. So easy. The amazing thing was how fast I had the part and how easy it was to find on Partselect.com. I ordered the part Monday and had it Tuesday. I was stunned and the tenant was impressed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSusan from North Wales PA

Spray arm came off and melted on coils

took it out of the bag and snapped it in. Less than 10 seconds.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLee from Columbus OH

Spray arm had come disconnected and fell on the heating element -- melting part

pulled the old part off (no tools required) and snappen on new spray arm

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerMichelle from Mogadore OH

Old spray arm melted

I used a screwdriver to remove melted spray arm. Then snapped the new spray arm into place. It was an easy repair thanks to the correct part from PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLisa from El Paso AR

Spray arm popped of during cycle and melted

Found your website, red the reviews, followed the simple instructions provided by others that had had the same problem and repair was complete in less than a minute. No tools needed. I am a handy girl and tackle a lot of repairs/projects, this is the first time that the job was actually easier than stated. Thanks for providing a good porduct, at a decent price WITH LAYMAN INSTRUCTIONS!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerStephen from Memphis TN

Missing spray arm

I snapped the new one into place and ran the cycle. This time, everything came out clean, except for the bowl that had caked on cinnamon from the weeks I didn't have the part

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJacob from Wichita KS

Spray arm fell off and melted

Snapped the new one on

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Lower Spray Arm

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRICHARD from COLUMBUS OH

Lower sprayer arm had fallen off and melted into the heating element

open dishwasher, pull out bottom rack, unscrew nut, install nut into sprayer arm, then with a clockwise motion screw sprayer arm with nut on to receiver until sprayer arm spins And nut is tightened. also i would like to thank PARTS SELECT FOR THE SPEEDY DELIVERY. THANK YOU

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-13 of 13