Quick Question!

Have you ever purchased from PartSelect.com before?

869316-1-S-Whirlpool-2198597           -Ice Maker Assembly -  8 Cube
869316-1-S-Whirlpool-2198597           -Ice Maker Assembly -  8 Cube 869316-2-S-Whirlpool-2198597           -Ice Maker Assembly -  8 Cube 869316-3-S-Whirlpool-2198597           -Ice Maker Assembly -  8 Cube http://www.partselect.com/Schematics/Maytag/1GORO42Y.gif

Ice Maker Assembly - 8 Cube

PartSelect Number PS869316

This icemaker can be used with 25-27 cubic feet refrigerators that have a vertical auger dispenser located on the freezer door. Reuse bottom bracket from the original icemaker and attach to the new.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker not making ice.
  • Ice maker won’t dispense ice.
  • Leaking.
  • Won’t start.
  • Ice maker dispenses too little ice.

Compare At

$149.27

You Save

$24.88

Your Price

$124.39
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 92 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Socket set
Customer: Barbara from Lake City, FL

Icemaker did not make ice

Ordered a replacement which arrived quickly, and delivered the next day. It was not difficult, three screws to undo and one electrical connection.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Al from The Villages, FL

Stopped making ice

refridg only 7 years old, poor design by whirlpool as this is second time ice maker failed. install was easy, hardest part was figuring out how to remove old unit. saved more than 50% of cost by doing it myself this time.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Socket set
Customer: Mel from Hiawassee, GA

Ice maker not working

Bless you PartSelect. Easy fix,saved Dollars. Great website. The satisfaction of fixing it myself was worth $. It is not the first time you have helped. PLEASE keep up the good work.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Charles from Missouri City, TX

Ice maker was inoperable

Took out 5 screws and replaced the unit easy as can be.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Wayne from Fairfax, VA

Icemaker quit making ice

After troubleshooting to determine that I needed the Icemaker assembly, I ordered the parts early on a tuesday and they arrived the next day. Quick. Opened the box and there was no packing material, just the icemaker in the box with a slip of paper instructions with one sentence on it. Said to remove ice shield from old icemaker and install on new one. To remove the old icemaker, I first had to removing the one screw on the bottom that secured the cover over the wiring harness. Next I removed the cover by sliding it towards back of freezer section and guiding around wires. Next I depressed up on two spring clips on the bottom of the icemaker to release it from the tracks and slide the icemaker out. Be careful with the hose for the water outlet. You may have to tip it backwards to get it to clear. Once out of the tracks, I disconnected the wiring harness and removed old icemaker. I reversed the process to stall the new one after I had removed the three screws and the ice shield off the old icemaker and installed on the new one. After installation, it took about 10 minutes for the sound of water running into the trays and we had ice 30 minutes later. Worked fine and hasn't missed a beat yet.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers, Socket set
Customer: Gregory from Phoenix, AZ

Icemaker died, had to replace the whole unit.

I just followed the instructions that other people had posted on your site. That informations was extrememly helpful and was part of the reason I chose Parts Select. That and the fact that you had multiple pictures of the icemaker which meant I knew I was ordering the right part. You are the best product/info site I have experienced to date. THANK YOU!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: Bernard from Rochester, MN

Old ice maker quit functioning.

Removed old unit and installed new unit. It was quick and easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: Larry from Blachly, OR

No ice

replaced icemaker

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Wayne from HOBART, OK

Ice maker stop working.

Pulled the old one out and replaced it with a new one.
Very Simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: john from sebastian, FL

Stopped making ice

the ice maker is held in by on screw. then whole unit comes out.three more 1/4 inch screws hold main unit in.put unit back in was makeing ice in under 30 min.
i ordered part wed night recieved it on fri. highly reccomend parts direct.
oh yeah my 14 year old son did the repair because i was out of town.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Jahad from Delano, CA

Stuck icemaker

Researched the problem online regarding a stuck icemaker. Found an online video demonstrating how to troubleshoot the problem. From there, I disassembled the icemaker and discovered the icecube tray to be worn (teflon coating flaking). Also, I discovered other parts that appeared to be damaged. I found the individual parts on PartSelect however, PartSelect suggested the entire Icemaker (was cheaper than the individual parts). I purchased the item from PartSelect on Saturday and the parts arrived Tuesday (fast service). I then proceeded to to reverse install the icemaker by transfering items that were not included in the unit, attaching it with three screews, sliding the unit in place, attaching the power cable, attaching the power cable cover, and re-attaching the icemaker cover one the refrigerator. Total time to install was lees than 5 minutes. I now can enjoy ice chilled drinks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: PAUL from FAIR LAWN, NJ

Ice maker stopped working

I paid for a service call to have the problem diagnosed, and then ordered and changed the parts myself, saving about 50% off the original estimate.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: David from Baton Rouge, LA

Replaced icemaker

Actually I watched the video provided on the website and read 3-4 other users installation instructions. This made the repair extremely easy to do, although my refrigerator was a side by side and the icemaker was mounted across the top instead of the sides it was still very easy to change out with the instructions provided. Part price and delivery was excellent. I will use Parts Select again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Robert from Iron River, MI

Refrigerator ice maker stopped making ice

I googled Whirlpool Replacement Parts and your site was listed in the search. I looked at your site and found over 29 people had the same issue. I read their reports and advice and went immediately and removed the ice maker. It was simple just having to use a nutdriver to remove three nuts. I looked up the replacement product on your site, ordered it and within two days I had the part. I replaced the new ice maker in less than 5 minutes and ice was being produced within a couple of hours and within 24 hours the bin was full and all was well. Great site and quick service. Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Ice Maker Assembly - 8 Cube
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: SAM from NAPERVILLE, IL

Ice maker quit working

Removed 3 screws from under icemaker and slid unit forward until I could disconnect plug on right side,which was the most difficult step of the process,and pulled icsmaker out.
Reversed the procedure with new unit, had a little difficulity with the rubber spout for the water fill,and in a while I had ice again.
Thanks to the info on your site I was able to verify that the valve solenoid was working properly so it saved me a step.
A word of caution-the icemaker plug has 120vac so unplug refrigerator before repair attempt.

Help other customers find the most helpful instructions.

Were these instructions helpful?