Ice Maker Assembly - 8 Cube

PartSelect Number PS869316

This icemaker can be used with 25-27 cubic feet refrigerators that have a vertical auger dispenser located on the freezer door. Reuse bottom bracket from the original icemaker and attach to the new.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker not making ice.
  • Ice maker won’t dispense ice.
  • Leaking.
  • Won’t start.
  • Compare At

    $133.86
  • You Save

    $22.31
  • Your Price

    $111.55
In Stock
Order within the next 6 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 83 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsSocket set

CustomerAlvin from Casa Grande AZ

Ice maker did not make ice

TO GET ME THINKING... OUR THERMOSTATE WAS NOT WORKING...IT WAS UNDER WARRANT. .CALL REPAIRMAN.. HE CAME OUT.. LOOKED AT IT, WENT TO SUPPLIER GOT A NEW ONE ...UNPLUGGED OLD THERMOSTATE AND PLUGGED IN NEW ONE....CHARGE...$120.00 SO WHEN THE ICE MAKER WENT OUT I CHECKED AND IT WAS OUT OF WARRANTY...TOOK OFF DOOR TO UNIT..2 SCREWS...UNPLUGGED UNIT....ICE MAKED IS ON A SHELF THAT HAS NOTCHES... LIFT UP A LITTLE AND SLIDE OUT...ORDERED NEW UNIY FROM PARTSELECT. ATTANCHED TO SHELF...PLUGGED IN TO ELECTRICY AND INSTALLED SHELF..PRAYED A LOT AND WORKS ....AL WILSON

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerPeter from Manchester NJ

Stopped making ice cubes.

Basically, we unscrewed the holding tray and disconnected the water supply and slid the old unit out.We then reversed procedure installing the new unit and poured some water into resevoir and waited till the ice was frozen and then reheated by the bottom section whiched allowed the tynes to cut and dump the cubes. we had previously bought and installed the motor for the old unit but after a day with no action, we brought that unit back to Sears and we ordered the whole replacement unit from PartsSelect. The part came within 3 days and we very happy with the results.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerAllen from Naperville IL

Ice maker quit making ice

I wanted to make sure I ordered the correct icemaker, so I turned off the water to the icemaker, and turned off the icemaker switch. One screw taken out for the harness protector and the entire unit became loose, and I worked it out of the holding slot and used a really small screwdriver to separate the plug. Once the size was accurately determined, a new unit was ordered. The new unit arrived two days later and the procedure reversed itself. Twenty minutes later "I have ice" Been working well ever since

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

Customermarcus from sheridan WY

Ice maker was not making ice

Removed the plastic service door, exposing the ice maker. Pulled the ice maker and the plastic tray it is attached to out of the freezer. Then unplugged the electrical connectioppn, which alllowed me to remove the ice maker and the plastic tray. I then used a 1/4" driver to remove 3 screws holding the ice maker to the tray and one screw that held a plastic cover over the electrical connection. Installation was everything in reverse of removal. Take care to install the water hose into the ice maker. Ice maker started working immediately.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsSocket set

CustomerBarbara from Lake City FL

Icemaker did not make ice

Ordered a replacement which arrived quickly, and delivered the next day. It was not difficult, three screws to undo and one electrical connection.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerAl from The Villages FL

Stopped making ice

refridg only 7 years old, poor design by whirlpool as this is second time ice maker failed. install was easy, hardest part was figuring out how to remove old unit. saved more than 50% of cost by doing it myself this time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set

CustomerMel from Hiawassee GA

Ice maker not working

Bless you PartSelect. Easy fix,saved Dollars. Great website. The satisfaction of fixing it myself was worth $. It is not the first time you have helped. PLEASE keep up the good work.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerCharles from Missouri City TX

Ice maker was inoperable

Took out 5 screws and replaced the unit easy as can be.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerWayne from Fairfax VA

Icemaker quit making ice

After troubleshooting to determine that I needed the Icemaker assembly, I ordered the parts early on a tuesday and they arrived the next day. Quick. Opened the box and there was no packing material, just the icemaker in the box with a slip of paper instructions with one sentence on it. Said to remove ice shield from old icemaker and install on new one. To remove the old icemaker, I first had to removing the one screw on the bottom that secured the cover over the wiring harness. Next I removed the cover by sliding it towards back of freezer section and guiding around wires. Next I depressed up on two spring clips on the bottom of the icemaker to release it from the tracks and slide the icemaker out. Be careful with the hose for the water outlet. You may have to tip it backwards to get it to clear. Once out of the tracks, I disconnected the wiring harness and removed old icemaker. I reversed the process to stall the new one after I had removed the three screws and the ice shield off the old icemaker and installed on the new one. After installation, it took about 10 minutes for the sound of water running into the trays and we had ice 30 minutes later. Worked fine and hasn't missed a beat yet.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers, Socket set

CustomerGregory from Phoenix AZ

Icemaker died, had to replace the whole unit.

I just followed the instructions that other people had posted on your site. That informations was extrememly helpful and was part of the reason I chose Parts Select. That and the fact that you had multiple pictures of the icemaker which meant I knew I was ordering the right part. You are the best product/info site I have experienced to date. THANK YOU!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerBernard from Rochester MN

Old ice maker quit functioning.

Removed old unit and installed new unit. It was quick and easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerLarry from Blachly OR

No ice

replaced icemaker

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerWayne from HOBART OK

Ice maker stop working.

Pulled the old one out and replaced it with a new one.
Very Simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

Customerjohn from sebastian FL

Stopped making ice

the ice maker is held in by on screw. then whole unit comes out.three more 1/4 inch screws hold main unit in.put unit back in was makeing ice in under 30 min.
i ordered part wed night recieved it on fri. highly reccomend parts direct.
oh yeah my 14 year old son did the repair because i was out of town.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Ice Maker Assembly - 8 Cube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerJahad from Delano CA

Stuck icemaker

Researched the problem online regarding a stuck icemaker. Found an online video demonstrating how to troubleshoot the problem. From there, I disassembled the icemaker and discovered the icecube tray to be worn (teflon coating flaking). Also, I discovered other parts that appeared to be damaged. I found the individual parts on PartSelect however, PartSelect suggested the entire Icemaker (was cheaper than the individual parts). I purchased the item from PartSelect on Saturday and the parts arrived Tuesday (fast service). I then proceeded to to reverse install the icemaker by transfering items that were not included in the unit, attaching it with three screews, sliding the unit in place, attaching the power cable, attaching the power cable cover, and re-attaching the icemaker cover one the refrigerator. Total time to install was lees than 5 minutes. I now can enjoy ice chilled drinks.

Help other customers find the most helpful instructions.

Were these instructions helpful?