2 of 4 people found this instruction helpful
Level of DifficultyReally Easy
Time to do repair:Less than 15 mins
CustomerGERALD from HARRISONBURG, VA
Old plug would not stay in.
removed old plug which snap out very easy and
snap in new plug.
1 of 2 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:15 - 30 mins
CustomerTracey from Barbeau, MI
Dryer was eating zippers and buttons
Removed the front plate. Scraped off the old felt lining on top of opening. Cleaned, dried and applied glue. Glue is SUPER sticky! Applied felt strip and let sit for 30 mins. The light hole plug just popped in place (2 seconds). My wife held the lid while I scrunched the door back on (tight fit) and we just pushed down on the white tabs that are were attached to the felt to get it to pop back in to place. Wallah! Cheap fix!