8690841-1-S-Whirlpool-7406P203-60-Broil Element - 3000W
8690841-1-S-Whirlpool-7406P203-60-Broil Element - 3000W 8690841-2-S-Whirlpool-7406P203-60-Broil Element - 3000W

Broil Element - 3000W

PartSelect Number PS8690841

This broil element is found on the roof of the oven.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Little to no heat when broiling.
  • Element will not heat.
  • Compare At

    $60.30
  • You Save

    $10.05
  • Your Price

    $50.25
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

3 of 4 people found this instruction helpful

Parts Used

  • Broil Element - 3000W

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customerkristen from Cape Elizabeth ME

Broiler wasn't working

First, I left the new part on the kitchen counter for a couple of days. To my surprise, NOT, my husband didn't take the bait.

With no other options I took control. First I turned off the power to the wall oven, unscrewed the bracket at the back of the oven which holds the broiler in place. Then I unscrewed the brace on the top of the the oven, pulled the element out, unhooked the connectors for the old, connected the new, and slid broiler into the brace. Screwed that down then pushed wires and connectors back and screwed bracket in place. Turned power back on and tested - works great.

Still don't think my husband's noticed a thing. Somethings are just better left unsaid.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Broil Element - 3000W

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRichard from San Jose AL

Replace the burnt out broil element (top)

The part arrived promptly and as described. I had already unscrewed the bad coil so it was easy to just put the new one back in on the open sockets. I then put the top support plate through the element and quickly screwed it back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Broil Element - 3000W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDavid from Brea CA

Broiler element burned out

Removed 2 element support screws and 2 element electrical connection screws. Removed the old defective element and replaced it with the new element reusing the four screws.
I received the new element two days after ordering in. Excellent service!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3