Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS8690633
This is the complete dishrack.
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.
This part works with the following brands: GE, Hotpoint & Kenmore.
Easilly took the rollers off and slipped on the new ones. Changed out the top rack. Now the dishwasher is back to new! Don't know why I put this off.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Lower assembly only require removal and replacement without tools. Upper assembly required screw driver and pliers to install water wand from old rack to new rack.The most surprising aspect of this repair was the short 36 hours that it took from order placement to product receipt.
Took out old basket, took off the sprayer arm and put it on the new basket.. pulled out the old wheels on the side tracks and slid the new basket in...pretty simple...
1. Removed the cap ends from the inner rails - easy2. Removed the old rusted rack from the inner rails- easy3. Removed the spray arm and conduit - a bit difficult: there's a hard-to-reach nut that you need to remove at the hub of the spray arm - A pain in the neck because it cannot be reached vertically.4. Installed the spray arm and conduit onto new rack. Make sure the conduit aligns with the pipe at the rear inner wall! - easy5. Installed the rack onto the rails - easy6. inserted the cap ends - done!
The Lower Rack was a simple swap. The Upper Rack had a tube and rotating sprayer that had to be removed and installed on the new rack. I used a nutdriver to remove a few screws and reinstall them on the new unit. Very simple.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.