8689825-1-S-Frigidaire-A00126501-Drain Pump
8689825-1-S-Frigidaire-A00126501-Drain Pump 8689825-2-S-Frigidaire-A00126501-Drain Pump 8689825-3-S-Frigidaire-A00126501-Drain Pump http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/V60CKUUA.gif

Drain Pump

PartSelect Number PS8689825

The pump ejects the water from the dishwasher.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Not draining.
  • Noisy.
  • Leaking.
  • Compare At

    $62.96
  • You Save

    $10.49
  • Your Price

    $52.47
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 16 reviews What's this?
 

3 of 4 people found this instruction helpful

Parts Used

  • Drain Pump

Level of DifficultyReally Easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerLONNIE from NORTH LAS VEGAS, NV

Water would not drain

cleared water from machine with bulb type basting tool. Placed two large bath towels on floor in front of machine. Removed machine to floor laying it on the towels on its left side. Removed pump. Installed new pump. Reinstalled machine. Worked fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Drain Pump

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerWayne from Providence, RI

Dish washer would not drain.

I pulled out the internal filter and assorted washer parts. All in good shape. I bailed out the washer and removed the pump assembly from under the washer. I pulled it apart to inspect impeller. all looked fine. Plugged pump in and turned on pump cycle. Pump did not operate as it should have and I ordered new pump. My daughter put it back together and all is working well now!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 13 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers

CustomerTheodore from Salisbury, NC

Fin in pump broke

pulled out dishwasher ,left lines hooked ,started cicle .heard pump.took apart.seen problem. order new one ,works like new..

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerEric from DeForest, WI

Dishwasher wouldn't drain after washing

The drain motor on the dishwasher started to and eventually did fail. I removed the two screws holding the unit in and the front plate on the bottom. I slowly walked it out from under the counter, and tipped it up on its left side. I removed the two mounting screws, and loosened the hose clamps on the inlet and outlet of the pump. Flushed out the drain line of left over soap and goo the pump failed to clear. Then installed the new one reversing the process.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Drain Pump

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerWilliam from Bryan, TX

Dishwasher would not drain

replaced the motor after fixing the impeller once before. seems to be a weakness in this model based on what I've read here. The motor does not fail it's the little impeller inside the housing that comes apart. One word of advice: use a wet/dry shop vac to extract the standing water from the dishwasher.

Help other customers find the most helpful instructions.

Were these instructions helpful?