Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS8689825
The pump ejects the water from the dishwasher.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
Remove lower front face by removing 2 screws. Turn power off at the breaker. Disconnect the power by removing the power cover screw and cover. This is located on the bottom right of the unit, next undo the wire nuts, and pull out the wires. Next turn off the water supply to the dishwasher. Then using an adjustable wrench disconnect the water line. Be careful it could bend. Once the power and water is removed gently slide out the unit. The pump is located on the right side under the dishwasher. Remove the to screws holding the pump in place. Unless the repair is done outside place a drain pan under the pump to catch any left over water. Next using needle nose pliers squeeze the clamp closest to the drain and pull the hose off. Pull out the pump, squeeze the second clamp, and remove the hose from the pump. Place hose on new pump and the work backwards installing the pump.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed standing water with wet vac. removed kick plate and screws attaching top to underside of counter. pulled unit out and layed it on it's front to gain easy access. unscrewed unit and removed hose clamps with pliers. installed new unit and reveresed order to put all back together. did not appear to want to work at first on full cycle mode. Ran Rinse and Hold cycle and it engauged drain pump first clearing out rest of water then, ran fine. all is working well now.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.