Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charles W - March 4, 2022
Verified Purchase
Easy repair
Repair went well, except for the copper line for the water supply line. Replaced copper line with a flexible hose and make sure that it's long enough to hook it up while it's out of the cabinet. The new motor was a very simple procedure, 5 minutes to replace. Took longer to get my tools and then having to buy another water line. The part I received was similar to the original and is working great so far
★★★★★
★★★★★
JEFF E - March 20, 2021
Verified Purchase
Part.
Part worked great as usual. Only problem was with UPS. They can't seem to follow instructions as to where item was to be left. it was shipped back to the company. And had to order again. And that part almost got shipped back. Yes UPS again. Partselect is great to work with.
★★★★★
★★★★★
George P - June 30, 2020
Verified Purchase
Easy fix ,
Works great now
★★★★★
★★★★★
Lynn V - June 21, 2019
Verified Purchase
Arrived on time. Worked as expected
Part was easy to install. Works as expected.
★★★★★
★★★★★
Larry L - May 28, 2019
Verified Purchase
just what i needed
fit and install was great
★★★★★
★★★★★
James C - May 16, 2019
Verified Purchase
Easy repair
Easy to install but for me, it didn't fix the problem
★★★★★
★★★★★
Jeff B - February 17, 2019
Verified Purchase
Pump for Frigidaire dish washer.
There was a little design mod on the new part. But it fit fine cleared where it needed to and works excellent. Washer is at least 10 years old.
★★★★★
★★★★★
Larry M - February 14, 2019
Verified Purchase
easy 10 min job, took longer to get dishwasher out from under the counter than to replace part, works perfect....thanks
perfect condition
★★★★★
★★★★★
Albert L - January 2, 2019
Verified Purchase
Easy Repair
I received my part when expected. Price for this part was cheaper than all other suppliers when searching as well as availability.
★★★★★
★★★★★
BRUCE S - November 29, 2018
Verified Purchase
Pump was perfect!
Easy fix and plenty of instructors ready to help.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 22 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water would not drain
Pulled out the dishwasher. And the copper supply line was kinked while pulling it out. Had replaced it with a new flexible 10 foot line, leaving enough room to leave it hooked up when pulled out of cabinet. Layed dishwasher on left side. Used screwdriver and pliers to remove hoses and 2 screws. Removed pump and installed new pump. Pushed
... Read moreit back into cabinet, making sure not to kink hoses as it's pushed into cabinet
Read less
Charles from UNION, MO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher didn't drain and made a loud buzzing sound during the discharge cycle
1. I unplugged the unit from the electrical outlet, shut off the water supply and disconnected the drain line from the garbage disposal. 2. I removed the bottom access panels, unfastened the DW from the counter top and slid it out as far as it would go without straining the hookups. 3. I removed the racks, lower sprayer and filter compone
... Read morents from the well and bailed as much water as I could with a plastic cup. 4.After placing an old bath towel underneath I disconnected the water supply hose at the DW and pulled the drain line and electric supply line through the cabinet wall and then removed the DW to the garage where I set it upside down on some old towels until it finished draining. 5. I located the drain pump, compared it with the replacement part and took a picture with my phone to record the correct orientation of the drain hose connection. 6. After disconnecting the power supply and drain hose from the drain pump I removed and replaced it with the new one and reconnected the power supply and drain hose. 7. After inspecting the DW for signs of other problems and finding none I righted the DW and returned it to the install point. 8. I drilled a new hole in the cabinet wall near the top because the previous installer failed to provide a means for the discharge siphoning to occur; that's probably what led to premature failure of the pump. 9. I fed the discharge hose through the new upper access hole and the power supply through it's old access hole and then reconnected the water supply at the DW. 10. Being careful not pinch, kink or stress any of the hookups I slid the DW back into it's nook and reconnected the drain hose to the garbage disposal and plugged in the power supply. 11. I turned the water supply back on and, with a flashlight, checked for any leaks under the DW. Seeing none I reinstalled the cabinet mounting screws, replaced the filter components and lower spray arm then ran the DW on the short wash cycle to test the fix. 12. Once the test was complete and everything worked correctly I checked the DW for level, made a minor adjustment accordingly, then reinstalled the racks and lower access panels. JOB DONE!
Read less
DENNIS from MINDEN, NV
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher would not drain even though the pump made a humming noise
I turned off the power and the water then I pulled it out into the floor I used a pair of pliers to remove the hoses and disconnected the wires from the pump then I just reversed my steps i will add that the pump on mine was located low to the floor and it was a bit difficult to get the new pump on until I use a small pan to sit one side
... Read moreof it on to raise it up off the floor and then it was no problem getting the pump on . I’m 66 year old female and if I can do it so can you .Good Luck to all you self repair folks.
Read less
Alta from Manchester, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drain pump failing
1.Removed slide out dishes baskets, removed inside plastic food screen (just to clean) and disconnected electrical plug and hot water connection under the sink. 2. Unscrewed dishwasher retaining screws from kitchen counter top and slid dishwasher out (very easy). 3. Flipped dishwasher on its front. 4. Unhooked the 2 drain hoses and electr
... Read moreical connectors from the old drain pump, unscrewed it (torx screws) from the drain pump retainer bracket and replaced it with the new drain pump. 5. Cleaned the water jet pump (got all the accumulated crud out from the "impellers") and reinserted it in the dish washer. 5. Turned the dishwasher upright and reattached the hot water hose (using plumbers tape) and the electrical plug. 6. Finished pushing the dishwasher back under the counter, reattached the retaining screws to the counter top, turned it on and basked in the quietness of the dishwasher.
Disconnected water and power. Two screws secured pump. Simply disconnect and reconnect. Perfectly quiet and operational. Great easy fix!!!
Bob from REVERE, MA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher not draining
Remove lower front face by removing 2 screws. Turn power off at the breaker. Disconnect the power by removing the power cover screw and cover. This is located on the bottom right of the unit, next undo the wire nuts, and pull out the wires. Next turn off the water supply to the dishwasher. Then using an adjustable wrench disconnect the w
... Read moreater line. Be careful it could bend. Once the power and water is removed gently slide out the unit. The pump is located on the right side under the dishwasher. Remove the to screws holding the pump in place. Unless the repair is done outside place a drain pan under the pump to catch any left over water. Next using needle nose pliers squeeze the clamp closest to the drain and pull the hose off. Pull out the pump, squeeze the second clamp, and remove the hose from the pump. Place hose on new pump and the work backwards installing the pump.
Read less
Jason from ARLINGTON, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drain pump no longer worked
removed the old pump and replaced it with a new one
Adam from Milwaukee, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not draining
Removed standing water with wet vac. removed kick plate and screws attaching top to underside of counter. pulled unit out and layed it on it's front to gain easy access. unscrewed unit and removed hose clamps with pliers. installed new unit and reveresed order to put all back together. did not appear to want to work at first on full cycle
... Read more mode. Ran Rinse and Hold cycle and it engauged drain pump first clearing out rest of water then, ran fine. all is working well now.
Read less
Joel from Sweet Home, OR
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher would not drain
replaced the motor after fixing the impeller once before. seems to be a weakness in this model based on what I've read here. The motor does not fail it's the little impeller inside the housing that comes apart. One word of advice: use a wet/dry shop vac to extract the standing water from the dishwasher.
William from Bryan, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water would not pump out
replaced the pump
william from livingston manor, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
4 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lucia
January 13, 2018
What drain hose attaches to the pump?
For model number FDB1050REC2
Hello Lucia, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS9494138. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Harold
February 7, 2019
I disconnected the 2 plug in wires from the drain pump, one white and the other a blue or Green & i didn't mark them, which goes on top plug in & which goes on bottom plug in?
Hello Harold, Thank you for the question. The Purple plugs in on the left and the White is on the Right. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Maureen
October 1, 2019
Lately the glasses and stainless steel bowls have a white cloudy deposit on them...like the rinse water is dirty or something...silver ware comes out the same way...deposits of white on them. any suggestions?
For model number FDB1050RECO
Hello Maureen, thank you for inquiring. This can be caused by phosphate-free dishwasher detergent, or by using too much detergent. You may also want to consider replacing the Lower Spray Arm, part number PS1524955 for your model. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Victor Yates
January 10, 2018
Water pumps out but water comes back in
For model number FDB 105 o r e c o
Hi Victor, Thank you for the question. I suggest checking the float and the float switch to see if they are stuck in the open position. If so the water can fill back into the tub after draining.Hope this helps!
Was this helpful?
Thank you for voting!
TIM
March 19, 2023
Once the wash cycle is started the is no water entering the washer. What could be the cause?
For model number FDB1050REM2
Hi Tim,
Thank you for your question. If your dishwasher will not fill with water, there are some parts that you will need to check to see which one is causing the issue. We recommend checking the water inlet valve, the float, the float switch and the door switch. We have included a link from our website that you may reference on how to check these parts. Once you have determined the part you need, please call customer service. We look forward to hearing from you!
