Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS8688178
This dishrack includes the wheels.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Pull old rack out, slip new one in!One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Exactly as described by a previous reviewer. I pulled out the old rack, put in the new rack and just moved over the cutlery rack.
Lower assembly only require removal and replacement without tools. Upper assembly required screw driver and pliers to install water wand from old rack to new rack.The most surprising aspect of this repair was the short 36 hours that it took from order placement to product receipt.
The Lower Rack was a simple swap. The Upper Rack had a tube and rotating sprayer that had to be removed and installed on the new rack. I used a nutdriver to remove a few screws and reinstall them on the new unit. Very simple.
remove lower rack. place in trash. place replacement rack into dishwasher
Simple replacement. Also note lower rack comes with all wheels attached
It was a very simple replacement. I took the old one out and rolled the new one in. It took less than 5 minutes!
Both upper and lower come complete w/combs. Bottom Rack asm the only thing I transfered was the the silverware holder. The new bottom comb pattern in 180 deg out from what orginal came with and they give you a sticker to place inside next to model and ser#. The upper Rack asm I had to transfer the spray wand and assemble and the two glass goblet stem holders.
Easiest repair ever. My new rack arrived in three days, opened the box and slid it in. Better quality than the original. Excellent service!
I removed the old rack and saved the flatware container. Then I put the new rack in. The difference between the old one and the new one is that between a busted grocery cart with one wheel that always wants to return to the parking lot, and a well-trained dog that does exactly what I ask it to. The new rack was worth the $95 I spent to get it.The new rack came with wheels and axles, so I didn't need to order more.
I took out the old rack and rolled in the new. I thought I was going to have to take the rollers off the old one and put them on the new, but they were already on the new rack. The hardest part was getting into the box. I am an 80 year old female.
Took me 15 min to repair. Part was diffrent origanal different than origanal very easy wish diagram on website was easier to understand. Wish u new part was different from origanal. But for the most part dishwasher is pretty simple to replace parts
I first tried the local appliance shop i got the wrong parts twice. I then wrote the model and serial #'s of my unit and found parts select. Got the right parts quickly and all I had to do was pull the old rack out and slide the new one in. Viola she was done ! Thanks Part Select !Matt Hansen
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.