8 of 10 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:15 - 30 mins
CustomerBeth from Osseo MI
No power from touch pad
Burners still worked but nothing in the oven because the touch pad had no power due to an electrical storm. I removed 6 screws from the back and then two screws from the circuit board and 3 connectors. Removed the old circuit board and put the new one in. Reconnected the 3 connectors and checked to see if that fixed the issue. Hardest part was getting the back plate back on. I would do this again - replacement part was around $100 and a new range over $300.