Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No Power from Touch Pad
Burners still worked but nothing in the oven because the touch pad had no power due to an electrical storm. I removed 6 screws from the back and then two screws from the circuit board and 3 connectors. Removed the old circuit board and put the new one in. Reconnected the 3 connectors and checked to see if that fixed the issue. Hardest
... Read more part was getting the back plate back on. I would do this again - replacement part was around $100 and a new range over $300.
Read less
Beth from Osseo, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
16 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
November 4, 2019
Will this fix an F5 error code? I checked the temperature probe and it read about 1000 ohms, as it should. I cannot think of what else it might be.
For model number WFG114SVQ0
Hi Wayne,
Thank you for your question. If the sensor checks out fine, then the issue is likely the electronic control board. Inspect your control board for any signs of burnt, shorted, or damaged contacts. You should also look for any other signs of wear or damage on the control board.
If you find any of the symptoms described above, you may need a replacement electronic control board. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Michael
January 12, 2024
got a f2 code ? is it the oven sensor of control board
For model number WFG231LVS1
Hi Michael, thank you for getting in touch. According to our research, the F2 error code indicates that there is a problem with the oven temperature sensor, part number PS11749737. You may need to replace it to fix the issue. We hope this solves your problem!
