Quick Question!

Have you ever purchased from PartSelect.com before?

820208-1-S-Frigidaire-316217002         -Temperature Sensor
820208-1-S-Frigidaire-316217002         -Temperature Sensor 820208-2-S-Frigidaire-316217002         -Temperature Sensor http://www.partselect.com/Schematics/Frigidaire/JXNRPXYO.gif

Temperature Sensor

PartSelect Number PS820208

The oven temperature sensor for your range may also be called a probe. The quick connect on this part may differ than your original piece. If the temperature sensor does not fit you will have to cut off the quick connect, and then wire together with porcelain wire nuts. The function of the oven temperature sensor is to measure the temperature in the oven and signal the other heating components. Before you begin this repair make sure to disconnect the power to the range. The tools required for this installation include a number two Phillips screwdriver or a number two square head screwdriver, and maybe a pair of wire strippers and crimpers.

This part works with the following brands: Frigidaire, Kenmore, Electrolux, Crosley, Tappan, Uni, Gibson, Westinghouse.

This part works with the following products: Range, Wall Oven, Microwave Oven Combo, Warming Drawer.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Oven is too hot.
  • Oven not heating evenly.
  • Will Not Start.
  • Element will not heat.

Compare At

$39.31

You Save

$6.55

Your Price

$32.76
Order within the next 13 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 3 reviews What's this?
1-3 of 3
 

104 of 158 people found this instruction helpful

Parts Used:
  • Temperature Sensor
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Dan from Bellevue, ID

Oven not heating to desired temperature

Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
  • Temperature Sensor
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Barbara from RAINBOW CITY, AL

Oven would not maintain correct set temperature.

Removed electrical connector and two screws. Attached the electrical connector to the new probe and attached with the two screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

113 of 361 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers
Customer: dempsey from eastland, TX

Bottom oven element not heating

replaced bottom oven element, did not fix the problem. replaced the thermostate and the terminal block and that did not fix the problem. parts select what is next?

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3