BBB A-Plus
820208-1-M-Frigidaire-316217002-Oven-Temperature-Sensor.jpg
820208-1-S-Frigidaire-316217002-Oven-Temperature-Sensor.jpg 820208-2-S-Frigidaire-316217002-Oven-Temperature-Sensor.jpg

Oven Temperature Sensor

PartSelect Number PS820208

Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Little or no heat when baking
  • Oven is too hot
  • Will not start
  • Oven not heating evenly
In Stock

  • Compare At

    $30.06

  • You Save

    $5.01

  • Your Price

    $25.05
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-2 of 2

 

22 of 34 people found this instruction helpful

Parts Used

    • Oven Temperature Sensor

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDan from Bellevue ID

Oven not heating to desired temperature

Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.

Help other customers find the most helpful instructions.

Were these instructions helpful?

27 of 111 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers

Customerdempsey from eastland TX

Bottom oven element not heating

replaced bottom oven element, did not fix the problem. replaced the thermostate and the terminal block and that did not fix the problem. parts select what is next?

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-2 of 2