| |
1 of 2 people found this instruction helpful
Parts Used
-
- Filter Cup and Housing Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
Customerdavid from fallston MD
Filter cup & housing assembly cracked & was leaking water
turned ice maker water off.Removed housing with 1/4" nut driver.disconnected water lines that had quick disconnect.(pushed bottom plastic washer up & popped off.unscrewed old filter cup off with nutdriver. Screwed new one in place,put filter in cup & screwed on,pushed water lines on.put housing back on & turned water on. No leaks & had my ice maker back in working order,also my water on front door.was easier than expected.lady was very helpful when ordering cause I was worried it may not be same one cause was slight difference in appearance.but it matched up to model number & ended fitting just fine,also was shipped very quick,1 day & it was at my door.nice to have ice again,thanks part select.
|
1 of 3 people found this instruction helpful
Parts Used
-
- Filter Cup and Housing Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDeborah from Hartwell GA
My filter cup busted
I was very pleased with this site when I ordered,It has a video to watch on how to take it off and put back on. Was very easy to order the correct part and do the work myself.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Filter Cup and Housing Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
Customerwillie from Jasper TX
Cracked cup
I removed the cover with 1/4" nutdriver then the two screws to the housing and disconneted the supply lines.reinstalled ,then I was finish.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Filter Cup and Housing Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsSocket set
CustomerRhonda from Beverly MA
Water in the cup froze and broke the housing assembly
First removed the moldling around filter cup and housing. Then removed housing. When part came in replaced the housing and put the molding back up.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Filter Cup and Housing Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerMarvin from Woodbrige VA
Piece of cake..aboutt 10 minutes...
first remove the cover... then the 2 screws and pulled the hoges
|
0 of 1 people found this instruction helpful
Parts Used
-
- Filter Cup and Housing Assembly
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerReginald from Richardson TX
No ice!!! no water!!! water spills from water filter housing assembly.
Just as the testimonies before me stated, this was very easy to do. The problem is the water filter housing assembly is cracked. With a simple nut driver tool, and the inexspensive part, you save yourself at least 60.00 on repair paying someone else to do it. Filtered water and ice again, at last...Do It Yourself!!! The wife will love you for it!!!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Filter Cup and Housing Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerGerardo from Amarillo TX
Broken water filter cup
i was surpriced it only took me 10 minutes to do the repair, the easiest repair i've ever done and so far so good, no leak inside the refrigerator and now we have cold water and ice, thanx for all the help.
JJ Amarillo, TX
|
0 of 2 people found this instruction helpful
Parts Used
-
- Filter Cup and Housing Assembly
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerLYNNE from LITTLEROCK CA
Water filter housing cracked
first I removed the old filter housing. With the new part from Parts Select, I simply tightened a few screws then attached our new part, within minutes we were ready to turn the water on. So simple and very pleased with our fast shipment and exact part that we needed. We now have Ice and water, and saved a lot of money by doing it ourselves.
|