| |
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerChris from Bakersfield CA
Hinge bearing shattered, and door shelf broke
Removed the top hinge from the door, removed the door, removed the doorstop and remains of the old bearing, and then replaced the items with the new ones in the reverse order. The screw I purchased was not needed.
The shelf had been broken for a while, and just needed to be slipped into the existing slots on the door
|
4 of 11 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerElgard from Rhinelander WI
Loud snaping noise when refrig door was opened past 90 degrees and closed again
First I removed one screw holding top hinge trim in place. I than removed two screws holding top hinge from refrig. I removed refrig door and laid it on a table. I than removed two screws holding the door stop and bearing hinge. I replaced the defective parts and reassembled in reverse order. Simple 10 minute repair.
|