The sensor measures level of soil in the water and the thermistor is used to regulate water temperature when certain cycles or options are selected.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Electrolux, Kenmore.
Part# 154473901 replaces these:
AP3580342, 1014458, 7154473901
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
PAUL
August 10, 2017
Will not fill or start, display panel says "clean s"
For model number FDB4050LHC1
Hello Paul, thank you for contacting us. Clean S is an error code that is caused by a keypad that is faulty. You will want to replace the control panel PS2345159 on the unit and if this does not correct then replace the control board PS2373379. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rebecca
August 2, 2021
All the indicator lights are flashing. We don’t have a model with a display. How can we tell what the error is?
For model number Electrolux EIDW6105GS1A
Hi Rebecca,
Thank you for your question. If the indicator lights are flashing try opening and closing the door to see if that will reset the dishwasher. If that does not help, there may be an issue the heating element.
If the element is not heating the water during a set amount of time, the lights may start flashing. There are some other parts that you will also need to check to see which one is causing the issue. You will need to check the drain pump, the door latch with switches, the control panel overlay and the electronic control board. We hope this helps! Good luck with the repair!
My Electrolux ewdw6505gs0b dishwasher suddenly stopped drying dishes properly and also stopped to be able to do the sanitize option/cycle. No error codes or nothing, just finishes with the clean message and no sanitize message on the panel. Actually if dishes are to dirty, at the end some ones don't get well clean. I know that in order to accomplish the tasks mentioned above, the water has to be hotter than the one that is supply and the part in charge of maintain the water hot and make i t hotter, is the heater. I disassembled the heater and checked for continuity with a multimeter and it looks ok, multimeter beeps as long as i touch both ends on the place the cables connectors go. Searching the web i founded that the sensor as you also mention is not only in charge of measures level of soil in the water but it has a thermistor that is used to regulate water temperature. I supposed that this is maybe the problem, could it'll be?
For model number EWDW6505GS0B
Hi Paul, thank you for your question. It could be either of those parts. The best thing to do would be to test them for continuity to see if they are working. Other things that you could check would be your tubes and spray arms for being clogged with debris. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Kim
January 3, 2020
Is it possible to leak water from turbidity sensor, red black wire, right hand side bottom of tub? Replace?
For model number PLD3465RECO
Hello Kim,
Thank you for your question. Our sources don't list any instances where the turbidity sensor would fix any leaking, usually the tub gasket or the water valve would fix leaking from your dishwasher. We hope this helps!
Was this helpful?
Thank you for voting!
Helen
July 30, 2021
The dishwasher continues to take on water and keeps washing the dishes and it never goes to the next cycle, the drying cycle. Any idea what is wrong with the dishwasher Frigidaire electrolux, 14 years old, used minimally.
For model number GLD2350RCQ
Hello Helen, Thank you for contacting us. We would recommend checking the following parts to fix your issue: the water inlet valve, the float switch, and the main control board. Hope this helps.
Hi Len,
Thank you for your question. The 03 error code you are getting is referring to the wash pump not operating correctly. You will need to inspect the pump and the lines hooked up to, to see if there are any blockages or any other issues. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Throstur
November 6, 2018
I have a error code i20 and the diswasker does not start
For model number ESF69049F
Hi Throstur,
Thank you for your question. The I20 error code is letting you know that your dishwasher has clogged filters or drain line plugs or pinches. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Stan
March 22, 2022
It might not be a failed turbidity sensor. Dishwasher continuous to run even after washing cycle seems complete. The drain pump doesn't stop running until the door is unlatched. Everything else seems normal.
For model number PLD2850RDC2
Hello Stan, Hello Stan, thank you for your question. We have researched the model you have provided, and we would suggest the Control board, part number PS2358675. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
