815490-1-S-Frigidaire-134159500         -2-Speed Motor with Pulley
815490-1-S-Frigidaire-134159500         -2-Speed Motor with Pulley 815490-2-S-Frigidaire-134159500         -2-Speed Motor with Pulley 815490-3-S-Frigidaire-134159500         -2-Speed Motor with Pulley

2-Speed Motor with Pulley

PartSelect Number PS815490

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Burning smell.
  • Compare At

    $136.55
  • You Save

    $22.76
  • Your Price

    $113.79
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

11 of 14 people found this instruction helpful

Parts Used

  • 2-Speed Motor with Pulley

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerHelen from Madison OH

Motor was overheating and kickins off during the cycle

After turning the water off and removing the hoses,I pulled the top off by removing the 2 screws from the clips in the back and popping the 2 spring clips in the front. I then removed the 2 side screws left and right to allow room for the sides to move out of the way of the motor. The back panel is spot welded so the panels stayed connected. I then removed the 2 screws from the water overflow guard on the motor. Once removed I unplugged the wire harness from the motor. After that the 4 nuts were taken off of the bottom of the motor. I pushed the belt tensioner in and pulled the motor out. Install the motor making sure the nuts are tight as they can work loose from vibration.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 12 people found this instruction helpful

Parts Used

  • 2-Speed Motor with Pulley

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerJacob from Evansville IN

Motor fried after being submerged in water...

I pulled the old motor out of the bottom of the washer. After undoing the screws and taking off the belt. I threw the new one in and tightened everything up and put the belt back on and it worked great... Super easy to change a motor out and a lot cheaper than buying a new waher...

The best part was that it only took one day to ship to my house and I picked the cheapest shipping amount... I recommend this site..

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2