BBB A-Plus

Ice Dispenser Bucket and Auger Assembly

PartSelect Number PS783767

This assembly includes the auger, bucket, cutting assembly (blades) and cover.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Ice maker will not make ice
  • Ice maker won’t dispense ice
In Stock

  • Compare At

    $153.38

  • You Save

    $25.56

  • Your Price

    $127.82
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 NEXT > 1-15 of 29

 

17 of 21 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGunars from Arlington TX

Plastic piece on front of ice bucket auger cracked an broke off

I just pulled the old Ice bucket assembly out and replaced it with the new one. Couldn't get any easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?

14 of 23 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJOHN from KINGSFORD MI

Ice crusher/dispenser would run but no ice would come out.

I removed the ice drawer,dumped out the ice and found the front end of the clear plastic auger and the crusher housing cover were broken. To dissassemble the auger system, I removed the phillips head screws that hold the crusher-dispenser onto the drawer, took off the washer and extrernal snap-ring from the auger shaft end. After removing the auger assebly, I pressed in on two plastic catches (on the dispenser housing) and gently pried the dispenser from the drawer with a small flat screwdriver. Then I removed the plastic nut from the end of the auger. Ass'y was much easier once the parts arrived. This repair would probably be too much for the average homeowner.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJaci from Grand Island NE

Ice maker was not working

Shipping service was great> Ordered on a Friday, received it on Tuesday. Slipped out the old one and put the new one in and it works great

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerVictor from Houston TX

Auger for the ice dispenser would not turn.

I replaced the ice tray with a new one. Could not tell what was broken in the tray, so I just purchased a new one, as the repair man service charge is 60.00 and then you have to pay for the part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGary from Spring Hill FL

Part of auger broke

We ordered the basket with auger and all I had to do was take the old one out and slide the new one in. EASY !

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerMario from Glenmoore PA

Broken ice dispenser tray

Replace

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDavid from Punta Gorda FL

Auger which is made of plastic broke and the bucket also had a crack in it

pulled out broken bucket and auger assy. and slid in the replacement. works great so far. The easiest part was ordering the part and it didn't take very long at all to get it. Customer Service was very good at getting the job done. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerPhil from Loomis CA

Brittle plastic pieces crack and break.

Repair was simple; unscrew and unsnap the various pieces, and snap-and-screw it back to together. But what a disappointing design. Between replacing seized solenoids (twice) and plastic parts, this through-the-door dispenser "feature" is a maintenance money pit. Sure glad that PartSelect can provide the parts quickly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerrobert from troutdale OR

Ice drawer started spitting out white plastic bits

Open freezer door, remove old drawer, insert new drawer (after washing), close freezer door. Saved old drawer for possible spare parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDavid from Naples FL

Ice maker broke

Ordered new Ice maker from partselect.com, saved money and received the next day!
Pulled out the old icemaker, Less than a minute to put together new one, no tools needed. Slid in the new one. Very Saisfied Customer
Dave P.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMichael from Las Vegas NV

Icebucket plastic cracked and was spitting plastic through dispenser

Repair was as easy as could be...All I had to do was slide out the old bucket and slide in the new one. The only problem was Partselect initially shipped the wrong bucket/auger unit. Upon being notified of the error, they shipped out a new one and I received it three days later. The quality seems the same as the original part, and the Partselect price was almost 35% less than from the mfg. I would definitely order from them again!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGeorge from Brighton MI

No problem

Remove the ice dispenser bucket and auger assembly from box. Washed the assembly. Opened freezer door. Removed old assembly. Slid new assembly into place. End of problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerWilliam R from Austin TX

A piece of the plastic cube container had broken off.

Ausgepull the old broken unit.
Ingeput the new one that you sent me.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBonnie J. from Las Vegas NV

Plastic parts of the auger were appearing in our glasses of water...

I took the ice bucket out and looked at it carefully. The auger was breaking apart little by little. I went on-line to find what part I needed. I came to Part Select and they had a diagram telling exactly what part would solve my problem. I ordered it online and it arrived, nicely packed about four days later. I took out the old ice bucket with the broken auger and replaced it with the new one (which I washed out before installing). It was so easy and I didn't have to pay a repairman to do it. The price was reasonable, too. I have this site bookmarked in case anything else needs to be replaced. It's amazing what you can do yourself!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

    • Ice Dispenser Bucket and Auger Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJames from Elmhurst IL

I had a broken auger after just replacing the front shield. Refrig is only 3 years old and the 2nd one in 5 years. Time to change brands.

Removed old ice dispenser Bucket assembly and installed new by hand. No tools needed. PartSelect is a great place for repair parts. Super fast delivery.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 NEXT > 1-15 of 29